NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
An 8 GB DDR4 3200 ECC UDIMM module with CL22 latency and 1.2 V operation for server and NAS systems
This 8GB DDR4 ECC UDIMM operates at 3200MHz with CL22 latency and 1.2V power draw. It uses a single-rank 1Rx8 configuration built with major OEM chips from Samsung, Micron or Hynix. The module targets QNAP NAS devices and compatible server or workstation boards that accept unbuffered ECC memory.
Installation requires a motherboard with a 288-pin DDR4 slot that supports unbuffered ECC UDIMMs at 1.2V. No heat spreader is present, so airflow from case fans or CPU coolers passes directly over the chips. The single module leaves remaining slots free for future capacity expansion.
Each module undergoes rigorous stress testing under load before shipment to verify reliability in continuous operation. ECC functionality detects and corrects single-bit errors during extended workloads. The 1.2V rating keeps power draw consistent across long sessions without thermal throttling concerns.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | ME25600-818K1 |
| Capacity | 8GB (1 x 8GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC UDIMM Motherboard Compatible |
The module runs at CL22, so the CAS latency is 22 cycles at 3200 MT/s.
It operates at 1.2 V without a heat spreader, so power draw stays low and passive airflow is sufficient for all-day operation.
The board needs a 288-pin DDR4 slot that accepts unbuffered ECC UDIMMs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?