NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
An 8 GB DDR4 3200 ECC UDIMM module with CL22 latency and 1.2 V operation for server and NAS systems
This 8GB DDR4 ECC UDIMM operates at 3200MHz with CL22 latency and 1.2V power draw. It uses a single-rank 1Rx8 configuration built with major OEM chips from Samsung, Micron or Hynix. The module targets QNAP NAS devices and compatible server or workstation boards that accept unbuffered ECC memory.
Installation requires a motherboard with a 288-pin DDR4 slot that supports unbuffered ECC UDIMMs at 1.2V. No heat spreader is present, so airflow from case fans or CPU coolers passes directly over the chips. The single module leaves remaining slots free for future capacity expansion.
Each module undergoes rigorous stress testing under load before shipment to verify reliability in continuous operation. ECC functionality detects and corrects single-bit errors during extended workloads. The 1.2V rating keeps power draw consistent across long sessions without thermal throttling concerns.
| Brand | NEMIX RAM |
|---|---|
| Series | QNAP NAS Device Memory |
| Model | QNAP NAS Memory |
| Part Number | ME25600-818K1 |
| Capacity | 8GB (1 x 8GB) |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 ECC UDIMM Motherboard Compatible |
The module runs at CL22, so the CAS latency is 22 cycles at 3200 MT/s.
It operates at 1.2 V without a heat spreader, so power draw stays low and passive airflow is sufficient for all-day operation.
The board needs a 288-pin DDR4 slot that accepts unbuffered ECC UDIMMs.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?