BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
8 GB DDR4 3200 SODIMM module validated for the POSIFLEX XT-8315 JIVA terminal
This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-8315 JIVA terminal. It delivers a direct-fit memory increase for point-of-sale and kiosk systems that require reliable, non-ECC unbuffered modules.
Running at 1.2 V with CL22 latency, the module operates without a heat spreader in the fanless chassis. Low voltage and standard DDR4 3200 signalling keep thermals and power draw minimal during continuous retail shifts.
The 2Rx8 260-pin design fills one socket to raise total system memory to 8 GB. The upgrade is worthwhile when the terminal ships with a smaller module or an empty slot and the workload demands more headroom for multitasking POS software.
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Power off the terminal, unplug it, open the memory compartment, align the notch on the module with the slot key, insert at an angle then press down until the side clips click. The step often missed is fully seating the module so both clips engage securely.
No routine maintenance is required for this unbuffered non-ECC SODIMM. Replacement is only needed if a memory error appears or capacity must be increased. The chips are from major OEM sources and stress-tested for long-term reliability.
The module runs at its rated 3200 MHz (PC4-25600) continuously within the terminal's thermal design. The first limit encountered is the system's maximum supported memory speed, not the module itself.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?