BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00277192BTC
Em stock
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 PC4-25600 CL22 2Rx8 1.2V 260-Pin SODIMM for POSIFLEX XT-8315 JIVA
8 GB DDR4 3200 SODIMM module validated for the POSIFLEX XT-8315 JIVA terminal
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 3200 SODIMM boosts POS terminal responsiveness
- CL22 1.20V timing keeps fanless XT-8315 JIVA running cool
- 2Rx8 260-pin unbuffered design matches system memory slot exactly
- Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability
- Non-ECC PC4-25600 module installs in minutes for immediate upgrade
Targeted POS Upgrade
This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-8315 JIVA terminal. It delivers a direct-fit memory increase for point-of-sale and kiosk systems that require reliable, non-ECC unbuffered modules.
Cool Efficient Operation
Running at 1.2 V with CL22 latency, the module operates without a heat spreader in the fanless chassis. Low voltage and standard DDR4 3200 signalling keep thermals and power draw minimal during continuous retail shifts.
Single Slot Capacity Step
The 2Rx8 260-pin design fills one socket to raise total system memory to 8 GB. The upgrade is worthwhile when the terminal ships with a smaller module or an empty slot and the workload demands more headroom for multitasking POS software.
Pontos fortes
- 8GB DDR4 3200 SODIMM boosts POS terminal responsiveness
- CL22 1.20V timing keeps fanless XT-8315 JIVA running cool
- 2Rx8 260-pin unbuffered design matches system memory slot exactly
- Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability
- Non-ECC PC4-25600 module installs in minutes for immediate upgrade
Especificações
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Perguntas sobre este artigo
How do I install this 260-pin SODIMM into the POSIFLEX XT-8315 JIVA and what step is often missed?
Power off the terminal, unplug it, open the memory compartment, align the notch on the module with the slot key, insert at an angle then press down until the side clips click. The step often missed is fully seating the module so both clips engage securely.
What maintenance or replacement will this CL22 1.2V module need over time?
No routine maintenance is required for this unbuffered non-ECC SODIMM. Replacement is only needed if a memory error appears or capacity must be increased. The chips are from major OEM sources and stress-tested for long-term reliability.
At what point does the 3200 MHz speed limit appear during sustained workloads?
The module runs at its rated 3200 MHz (PC4-25600) continuously within the terminal's thermal design. The first limit encountered is the system's maximum supported memory speed, not the module itself.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00279771BTC
Em stock
