Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 4800 PC5-38400 CL40 1.1V 1Rx6 262-pin Non-ECC SODIMM server RAM

SKU CH-7TJY-3E44C

An 8 GB DDR5 SODIMM running at 4800 MT/s with CL40 latency and 1.1 V operation for compact server and laptop upgrades

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom for multitasking workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • CL40 latency supports responsive performance in compatible platforms
  • 1V operation reduces power draw in dense memory configurations
  • 262-pin SODIMM form factor fits small form factor server slots

DDR5 4800 SODIMM for SFF systems

This NEMIX RAM module delivers 8 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It operates at 1.1 V with CL40 latency and uses a 1Rx6 unbuffered non-ECC design. The stick is built for small-form-factor PCs and compatible server platforms that accept this specification.

Suits DDR5 4800 slots needing a single 8 GB stick

Builders upgrading a laptop or SFF workstation with an open SODIMM slot at this speed will find it a direct fit. Systems that require ECC, registered modules, a different voltage, or a higher capacity per module should look at other parts.

1Rx6 unbuffered non-ECC at 1.1 V

The rank configuration, buffering type, ECC status and voltage together determine whether the platform will POST and run stably. Verify the motherboard or laptop manual for DDR5 4800 SODIMM support with these exact electrical and organisation parameters before purchase.

Kohokohdat

  • 8GB capacity expands server memory headroom for multitasking workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • CL40 latency supports responsive performance in compatible platforms
  • 1V operation reduces power draw in dense memory configurations
  • 262-pin SODIMM form factor fits small form factor server slots

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: MS38400-816K1-DR580L-IL03-SO48-V27
Part NumberPart#: MS38400-816K1-DR580L-IL03-SO48-V27
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx6
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

Will the 262-pin SODIMM fit a Supermicro MEMDR580LIL03SO48 slot?

The module uses a 262-pin SODIMM form factor and is listed as compatible with the Supermicro MEMDR580LIL03SO48, so it will seat in that slot.

What is the correct orientation for inserting the notch on this DDR5 SODIMM?

Align the single notch on the module with the key in the slot, press down firmly until both side clips click, and verify the gold contacts are fully seated.

When should the 8GB DDR5 4800 module be replaced?

Replace it if memory diagnostics report uncorrectable errors, the system fails to POST with this module installed, or capacity no longer meets workload demands.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.