暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 4800 PC5-38400 CL40 1.1V 1Rx6 262-pin Non-ECC SODIMM server RAM

SKU CH-7TJY-3E44C

An 8 GB DDR5 SODIMM running at 4800 MT/s with CL40 latency and 1.1 V operation for compact server and laptop upgrades

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS Latency40
  • Voltage1.1V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom for multitasking workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • CL40 latency supports responsive performance in compatible platforms
  • 1V operation reduces power draw in dense memory configurations
  • 262-pin SODIMM form factor fits small form factor server slots

DDR5 4800 SODIMM for SFF systems

This NEMIX RAM module delivers 8 GB of DDR5 4800 memory in a 262-pin SODIMM form factor. It operates at 1.1 V with CL40 latency and uses a 1Rx6 unbuffered non-ECC design. The stick is built for small-form-factor PCs and compatible server platforms that accept this specification.

Suits DDR5 4800 slots needing a single 8 GB stick

Builders upgrading a laptop or SFF workstation with an open SODIMM slot at this speed will find it a direct fit. Systems that require ECC, registered modules, a different voltage, or a higher capacity per module should look at other parts.

1Rx6 unbuffered non-ECC at 1.1 V

The rank configuration, buffering type, ECC status and voltage together determine whether the platform will POST and run stably. Verify the motherboard or laptop manual for DDR5 4800 SODIMM support with these exact electrical and organisation parameters before purchase.

特長

  • 8GB capacity expands server memory headroom for multitasking workloads
  • DDR5 4800 speed delivers high bandwidth for data-intensive applications
  • CL40 latency supports responsive performance in compatible platforms
  • 1V operation reduces power draw in dense memory configurations
  • 262-pin SODIMM form factor fits small form factor server slots

仕様

BrandNEMIX RAM
ModelPart#: MS38400-816K1-DR580L-IL03-SO48-V27
Part NumberPart#: MS38400-816K1-DR580L-IL03-SO48-V27
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
CAS Latency40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx6
ChipsetMajor OEM Samsung, Micron, Hynix

この商品に関する質問

Will the 262-pin SODIMM fit a Supermicro MEMDR580LIL03SO48 slot?

The module uses a 262-pin SODIMM form factor and is listed as compatible with the Supermicro MEMDR580LIL03SO48, so it will seat in that slot.

What is the correct orientation for inserting the notch on this DDR5 SODIMM?

Align the single notch on the module with the key in the slot, press down firmly until both side clips click, and verify the gold contacts are fully seated.

When should the 8GB DDR5 4800 module be replaced?

Replace it if memory diagnostics report uncorrectable errors, the system fails to POST with this module installed, or capacity no longer meets workload demands.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。