Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green circuit boards with black chips and gold contacts lying flat

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 4800 ECC RDIMM CL40 1.1V 1Rx8 GIGABYTE MZ73-LM1 memory upgrade

SKU CH-ASJ8-BQJY7

96 GB DDR5 4800 ECC registered RDIMM kit in six 16 GB modules at 1.1 V CL40, validated for the Gigabyte MZ73-LM1 motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Näytä 18 muuta kokoonpanoa
  • 96 GB total capacity from six 16 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated memory controller specs
  • Registered ECC design corrects single-bit errors and offloads the controller for full-slot stability
  • 1 V operation at 1Rx8 rank is the exact voltage and organization the platform expects
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM1 motherboard slots precisely

Exact-match 96 GB DDR5-4800 kit for GIGABYTE

This 96 GB kit contains six 16 GB DDR5 RDIMMs rated at 4800 MT/s with CL40 latency and 1.1 V operation. Each module is a 288-pin registered ECC DIMM built with 1Rx8 organization using major-brand DRAM. The kit is specified for the GIGABYTE MZ73-LM1 motherboard and matches the board's required registered form factor.

Registered ECC architecture for full-slot population

Registered buffering reduces electrical load on the memory controller so all six slots can run fully populated at rated speed. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unexpected reboots in production workloads. The modules install directly into the board's 288-pin DDR5 RDIMM slots; no heat spreaders are fitted, so airflow clearance follows the motherboard's own DIMM-spacing rules.

Suited for MZ73-LM1 servers needing maximum

This kit targets administrators upgrading a GIGABYTE MZ73-LM1 to its full 96 GB registered ECC configuration with matched 1Rx8 modules. Builders who require unbuffered UDIMMs, SODIMM form factors, speeds above 4800 MT/s, or capacities beyond 96 GB should look at other memory lines.

Kohokohdat

  • 96 GB total capacity from six 16 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency matches the board's rated memory controller specs
  • Registered ECC design corrects single-bit errors and offloads the controller for full-slot stability
  • 1 V operation at 1Rx8 rank is the exact voltage and organization the platform expects
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM1 motherboard slots precisely

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What maximum memory capacity does the GIGABYTE MZ73-LM1 support with this 96GB kit installed?

The kit provides 96GB across six 16GB modules. The motherboard's manual defines the maximum supported capacity and approved DIMM population order for full recognition.

How much heat does this 1.1V DDR5 RDIMM kit generate under continuous server workloads?

Operating at 1.10V without a heat spreader, the modules rely on chassis airflow. Registered buffering reduces controller load, helping thermal stability during sustained operation.

Which motherboard and memory controller features are required for this registered ECC kit to function?

The GIGABYTE MZ73-LM1 must support 288-pin DDR5 RDIMMs with ECC and registered buffering. The memory controller initialises the 1Rx8 modules at 4800 MT/s CL40.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.