Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM DDR5 256GB 8x32GB 4800MHz CL40 1.1V ECC Registered RDIMM memory upgrade

SKU CH-9HBS-Y2CNM

A 256 GB DDR5 server memory kit of eight 32 GB registered ECC RDIMMs running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H13SSW motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Näytä 24 muuta kokoonpanoa
  • 256 GB kit fills eight slots for maximum server capacity
  • DDR5-4800 speed matches the board's rated frequency for stable throughput
  • Registered ECC design corrects single-bit errors to protect critical workloads
  • 1 V operation meets DDR5 standard voltage for efficient power draw
  • Verified fit for Supermicro H13SSW motherboard ensures correct population rules

Server-grade DDR5 ECC RDIMM kit

This 256GB kit contains eight 32GB DDR5 4800MHz Registered DIMMs built for the Supermicro H13SSW motherboard. The modules run at 1.1V with CL40 latency and use a 2Rx8 organisation that matches the board's memory controller requirements. Registered buffering and on-die ECC protect data integrity in multi-socket server workloads. It is not suited for desktop boards that accept only unbuffered UDIMMs.

Thermals and power at rated speed

Operating at the standard 1.1V DDR5 voltage keeps power draw predictable across all eight slots when the system runs at 4800MHz. The modules have no heat spreader, so airflow through the server chassis manages module temperature during normal operation. Registered buffering reduces electrical load on the memory controller, helping overall platform stability. Noise and thermals remain governed by the server's own fan curves rather than the memory itself.

Behaviour under sustained load

Full population of all eight slots at 4800MHz is supported by the Registered architecture, allowing continuous throughput without down-clocking due to signal integrity limits. ECC corrects single-bit errors in real time, preventing silent data corruption during long compute jobs. The 2Rx8 rank structure maintains bandwidth consistency across extended sessions. Verify the motherboard manual for approved population order and maximum supported capacity before deployment.

Kohokohdat

  • 256 GB kit fills eight slots for maximum server capacity
  • DDR5-4800 speed matches the board's rated frequency for stable throughput
  • Registered ECC design corrects single-bit errors to protect critical workloads
  • 1 V operation meets DDR5 standard voltage for efficient power draw
  • Verified fit for Supermicro H13SSW motherboard ensures correct population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install this 8-module DDR5 4800MHz RDIMM kit in my Supermicro H13SSW, and what step do people often miss?

Power down and unplug the server. Open the chassis and locate the 288-pin DDR5 slots. Follow the motherboard manual's exact population order for all eight 32GB modules. Align each module's notch, press firmly until both clips lock. The step often missed is verifying the BIOS recognises the full 256GB at 4800MHz CL40 after first boot.

What maintenance or replacement will this registered ECC DDR5 memory need over its service life?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required. ECC corrects single-bit errors automatically. If a module fails, the lifetime replacement warranty covers a swap. Keep firmware updated per Supermicro guidance to maintain memory-controller compatibility.

What limit appears first when this 256GB DDR5 4800MHz CL40 kit runs sustained workloads on the H13SSW?

The memory controller's maximum supported capacity and population rules for the H13SSW are the first limit. All eight slots filled with 2Rx8 registered DIMMs at 1.1V 4800MHz CL40 hits that ceiling. Thermal throttling is unlikely without overclocking, but airflow must match the server's design specs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.