Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 288GB (6x48GB) 4800MHz CL40 ECC RDIMM Supermicro H13DSH

SKU CH-B8A2-SCKE2

Six 48 GB DDR5-4800 CL40 1.1 V registered ECC RDIMMs totalling 288 GB, validated for the Supermicro H13DSH motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Näytä 30 muuta kokoonpanoa
  • 288 GB total capacity lets memory-heavy workloads scale across all slots
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5 4800 MHz speed delivers rated throughput for Supermicro H13DSH platforms
  • 2Rx8 organisation matches the board's population rules for full-capacity recognition
  • 1 V operation meets the exact voltage the memory controller expects

288GB DDR5 ECC RDIMM kit for Supermicro H13DSH

This 288GB kit contains six 48GB DDR5-4800 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13DSH memory controller expects. It is intended for administrators who need to populate every slot at full capacity with hardware validated for that specific motherboard.

Thermals noise and power draw in normal use

Each module runs at 1.1V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller so all six slots operate at rated speed, while ECC corrects single-bit errors before they affect workloads.

2Rx8 registered ECC at CL40

The dual-rank 2Rx8 organisation combined with CL40 latency and PC5-38400 bandwidth determines whether this kit matches your board's population rules and performance targets. Verify the manual for supported capacities and slot order before installation.

Kohokohdat

  • 288 GB total capacity lets memory-heavy workloads scale across all slots
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5 4800 MHz speed delivers rated throughput for Supermicro H13DSH platforms
  • 2Rx8 organisation matches the board's population rules for full-capacity recognition
  • 1 V operation meets the exact voltage the memory controller expects

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the six 48 GB DDR5 RDIMM modules in my Supermicro H13DSH, and which step is most often missed?

Power off the server, open the chassis, and insert each 288-pin module into the slots listed in the motherboard manual in the exact population order; the step most often missed is following that specific sequence instead of filling the first six sockets.

What maintenance or replacement will this 288 GB DDR5 ECC RDIMM kit need over its service life?

No routine maintenance is required; the modules have no heat spreaders to clean, and ECC corrects single-bit errors on the fly, so replacement only occurs if a module fails.

What limit appears first when the Supermicro H13DSH runs this 4800 MHz CL40 DDR5 kit fully populated under sustained load?

The memory controller’s maximum supported speed with six 2Rx8 registered DIMMs installed is the first limit encountered.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.