Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules with black chips and gold contacts no heat spreader

NEMIX RAM

NEMIX RAM DDR5 32GB (2x16GB) 4800MHz ECC Registered RDIMM 1Rx8 CL40 1.1V Supermicro H13SSF memory upgrade

SKU CH-V9JY-M1DNX

32 GB dual-channel DDR5 ECC RDIMM kit at 4800 MHz CL40, 1.1 V, 1Rx8, validated for the Supermicro H13SSF motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Näytä 30 muuta kokoonpanoa
  • 32 GB kit runs at DDR5-4800 with CL40 timing for rated server speed
  • Registered ECC design corrects single-bit errors and keeps all slots stable fully populated
  • 1 V 1Rx8 modules match Supermicro H13SSF memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the board's DIMM slots — not UDIMM or SODIMM
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade component quality

32GB DDR5 ECC RDIMM kit for Supermicro H13SSF

This 32GB kit contains two 16GB DDR5 4800MHz Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSF memory controller expects. The 1Rx8 organization and CL40 latency match the board's population rules so every slot is recognised at full capacity. It is designed for servers that require registered error-correcting memory and will not work in systems that only accept unbuffered UDIMMs or SODIMMs.

Thermals noise and power draw

Operating at 1.10V the modules draw minimal power and run without a heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power stable when all slots are populated. No active cooling is included so acoustics depend entirely on the host server's fan profile.

Build quality and daily implications

The 288-pin RDIMM form factor fits only motherboards wired for registered DDR5 memory; it cannot be installed in consumer boards or laptops. ECC circuitry corrects single-bit errors on the fly, preventing silent data corruption that could halt production workloads. Major OEM DRAM from Samsung Micron or Hynix underpins the lifetime replacement warranty and US-based technical support.

Kohokohdat

  • 32 GB kit runs at DDR5-4800 with CL40 timing for rated server speed
  • Registered ECC design corrects single-bit errors and keeps all slots stable fully populated
  • 1 V 1Rx8 modules match Supermicro H13SSF memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the board's DIMM slots — not UDIMM or SODIMM
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade component quality

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install these 288-pin RDIMMs in the Supermicro H13SSF, and which slot order does the manual require?

Power down the server, open the chassis, and insert each 16 GB module into the DIMM slots specified by the Supermicro H13SSF manual for a two-DIMM population; the registered design needs the exact slot order so the memory controller initialises all 32 GB at DDR5-4800.

What maintenance or replacement will this DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreader and no moving parts, so no routine maintenance is required; if a single-bit error exceeds ECC correction or a module fails, the lifetime replacement warranty covers a swap of the affected 16 GB DIMM.

What limit appears first when the Supermicro H13SSF runs this 1Rx8 kit at full load continuously?

The registered buffer and 1.10 V operation keep the memory controller stable, so the first ceiling you hit is the DDR5-4800 CL40 timing ceiling — bandwidth and latency stay fixed at the rated 38400 MT/s transfer rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.