Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM DDR5 384GB 4x96GB 4800MHz CL40 ECC RDIMM memory upgrade

SKU CH-TFCP-Q5YG9

A 384 GB kit of four 96 GB DDR5 4800 MHz CL40 ECC registered RDIMM modules at 1.1 V, validated for the Supermicro H14SSL-NT motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Näytä 24 muuta kokoonpanoa
  • 384 GB total capacity from four 96 GB modules
  • DDR5 4800 MT/s speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor fits Supermicro H14SSL-NT motherboard

Exact-match DDR5 server upgrade

This 384 GB kit contains four 96 GB DDR5-4800 RDIMMs built to the precise rank, voltage and timing the Supermicro H14SSL-NT motherboard expects. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed. The modules operate at 1.1 V with CL40 latency and use 288-pin DDR5 form factor.

Suited for fully populated H14SSL-NT builds

Ideal for administrators expanding a Supermicro H14SSL-NT system to its maximum supported capacity with validated 2Rx4 registered ECC modules. Not intended for workstations or consumer boards that require unbuffered UDIMMs or SODIMMs. Buyers needing a different capacity or rank configuration should verify their motherboard manual before ordering.

Handles maximum-capacity server workloads

Four 96 GB RDIMMs deliver 384 GB total capacity for memory-intensive virtualization, database and compute tasks that benefit from full-channel population. Registered buffering maintains stability when all slots are filled, while ECC corrects single-bit errors on the fly. Systems requiring higher frequencies, lower latencies or non-ECC operation will need a different memory specification.

Kohokohdat

  • 384 GB total capacity from four 96 GB modules
  • DDR5 4800 MT/s speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor fits Supermicro H14SSL-NT motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard must I already own for this 384GB DDR5-4800 kit to be recognised at full capacity?

The kit is verified for the Supermicro H14SSL-NT motherboard; its memory controller expects the exact 2Rx4 rank, 1.10V voltage and CL40 timing this kit provides.

Will these 96GB RDIMMs run alongside smaller DDR5 modules I keep in other slots?

Registered ECC RDIMMs offload the controller so every populated slot runs at the rated 4800MT/s, but the board's population rules dictate which capacities can mix — consult the manual for approved slot order.

How do I confirm the 384GB kit is operating at DDR5-4800 CL40 after installation?

Check the BIOS memory information or OS hardware report: it should show 384GB total, 4800MT/s speed, CL40 latency and ECC active on all four modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.