Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 4800 1.1TB (12x96GB) ECC RDIMM CL40 2Rx4 Supermicro H14DST-FL memory upgrade

SKU CH-57DN-Y8H7Z

1.1 TB server memory kit with twelve 96 GB DDR5 ECC registered RDIMMs running at 4800 MHz CL40 for Supermicro H14DST-FL

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Näytä 30 muuta kokoonpanoa
  • 1TB total capacity from twelve 96GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated memory controller limits
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full-population stability across all twelve slots
  • 10V operating voltage aligns with the Supermicro H14DST-FL memory specification

Exact-match DDR5-4800 kit for Supermicro H14DST-FL

This 1.1TB kit delivers twelve 96GB DDR5 RDIMMs built to the memory controller's exact rank, voltage and timing requirements. It targets administrators who need full-capacity population on the H14DST-FL without guesswork. Buyers who need UDIMM, SODIMM or non-ECC modules cannot use this kit.

1.1TB registered ECC capacity with CL40 timing

Twelve dual-rank 2Rx4 modules provide 1.1TB at DDR5-4800 (PC5-38400) running at 1.10V with CL40 latency. Registered architecture offloads the controller so every slot runs fully populated at rated speed while ECC corrects single-bit errors on the fly. Workloads exceeding 1.1TB or requiring lower latency than CL40 will need a different configuration.

288-pin RDIMM form factor with major OEM chips

Modules use Samsung, Micron or Hynix components in a 288-pin registered DIMM package without heat spreaders. The form factor matches the H14DST-FL's slot keying and population rules exactly. Systems that require UDIMM, SODIMM or unbuffered memory cannot accept these modules.

Kohokohdat

  • 1TB total capacity from twelve 96GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency matches the board's rated memory controller limits
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organisation enables full-population stability across all twelve slots
  • 10V operating voltage aligns with the Supermicro H14DST-FL memory specification

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 12 DDR5 4800 RDIMM modules populate every slot on my Supermicro H14DST-FL without reducing the rated speed?

The kit is verified for the H14DST-FL motherboard and uses the exact 2Rx4 registered ECC layout the board expects, so all 12 slots can run at the full DDR5 4800 speed when populated per the manual's population order.

How can I confirm the 1.1 TB kit is running at CL40 and 1.10 V after installation?

Enter the BIOS or use a hardware-monitoring tool such as IPMI to verify the memory frequency shows 4800 MT/s, the CAS latency reads 40 and the DIMM voltage reports 1.10 V.

Does the 12-module box include heat spreaders or any cables I would need to add?

The package contains only the 12 bare 288-pin RDIMM modules; no heat spreaders, cables or additional accessories are included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.