Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules without heat spreaders in a row

NEMIX RAM

NEMIX RAM DDR5 4800 768GB (8×96GB) CL40 2Rx4 1.1V ECC RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-3J4N-FMGNB

Eight 96 GB DDR5-4800 RDIMMs deliver 768 GB of registered ECC memory for the Gigabyte MZ33-CP1 server board

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Näytä 18 muuta kokoonpanoa
  • 768 GB total capacity from eight 96 GB modules for maximum server memory density
  • DDR5-4800 speed with CL40 latency runs at rated frequency on the GIGABYTE MZ33-CP1
  • Registered ECC design corrects single-bit errors and keeps all slots stable at full population
  • 1 V operation matches the platform's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required motherboard slots without adapters

Exact-match DDR5 kit for GIGABYTE MZ33-CP1

This 768GB kit contains eight 96GB DDR5 4800 RDIMMs built to the board's exact rank, voltage and timing requirements. Registered ECC architecture ensures the memory controller recognises every module at full capacity. It targets administrators upgrading a compatible GIGABYTE server platform.

288-pin Registered DDR5 form factor

The modules use the 288-pin RDIMM layout the MZ33-CP1 requires, not UDIMM or SODIMM. Each stick runs at 1.1V with CL40 latency and 2Rx4 organisation matching the board's population rules. Using a different form factor would prevent the system from posting.

768GB total capacity across eight slots

Fully populating all channels delivers 768GB of ECC-protected memory for large virtualisation or database workloads. Registered buffering keeps every slot stable at the rated 4800 MT/s speed. Capacity stops at the kit's 768GB limit; larger configurations need a different motherboard.

Kohokohdat

  • 768 GB total capacity from eight 96 GB modules for maximum server memory density
  • DDR5-4800 speed with CL40 latency runs at rated frequency on the GIGABYTE MZ33-CP1
  • Registered ECC design corrects single-bit errors and keeps all slots stable at full population
  • 1 V operation matches the platform's memory controller specification exactly
  • 288-pin RDIMM form factor fits the required motherboard slots without adapters

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 4800 MHz speed mean once the kit is installed in the GIGABYTE MZ33-CP1?

The modules will operate at DDR5-4800 with CL40 timing at 1.1 V, delivering the rated PC5-38400 data rate when the motherboard populates all eight slots.

How does the PC5-38400 designation relate to the DDR5 interface on this board?

PC5-38400 is the peak transfer rate specification for DDR5-4800; the GIGABYTE MZ33-CP1 memory controller runs the kit at that rate when fully populated with registered DIMMs.

What physical requirements must the MZ33-CP1 meet to accept this 8 × 96 GB kit?

The board needs eight 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 1.1 V to recognise the full 768 GB capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.