Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 384GB 6x64GB ECC RDIMM Supermicro H14SST-G memory upgrade

SKU CH-KQ4S-Y6CWR

A 384 GB DDR5 4800 registered ECC kit of six 64 GB modules built for the Supermicro H14SST-G motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Näytä 30 muuta kokoonpanoa
  • 384GB capacity in a six-module kit enables maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput for H14SST-G
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 1V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G DIMM slots exactly

Exact DDR5-4800 ECC RDIMM kit for Supermicro

This 384GB kit contains six 64GB registered DDR5 modules rated at 4800 MT/s with CL40 latency and 1.1V operation. It is built for administrators upgrading a Supermicro H14SST-G motherboard that requires 288-pin RDIMM population.

384GB across six slots with registered buffering

The 2Rx4 registered design lets the memory controller drive all six slots at full capacity without signal degradation. ECC corrects single-bit errors on the fly, protecting workloads that cannot tolerate silent corruption. Headroom ends when the board's maximum supported capacity or slot count is reached.

288-pin RDIMM form factor decides fit

Only motherboards that accept DDR5 288-pin registered DIMMs with 2Rx4 organisation and 1.1V signalling can use this kit. Systems requiring UDIMM, SODIMM, or a different voltage will not recognise the modules.

Kohokohdat

  • 384GB capacity in a six-module kit enables maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput for H14SST-G
  • Registered ECC architecture corrects single-bit errors to prevent silent data corruption
  • 1V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin RDIMM form factor fits the Supermicro H14SST-G DIMM slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 6x64GB DDR5 4800 CL40 kit work with the DDR5 RDIMMs already installed in my Supermicro H14SST-G?

The kit is a 384GB 6x64GB DDR5 4800 CL40 1.1V 2Rx4 ECC Registered RDIMM set; match speed, voltage, rank and ECC type exactly to your existing modules and follow the motherboard manual for population order.

How can I confirm the 384GB kit is running at DDR5 4800 CL40 after installation?

Check the BIOS memory information or OS tooling for DDR5 4800 (PC5-38400) speed, CL40 latency, 1.10V voltage, 2Rx4 registered ECC status and full 384GB capacity across all six slots.

What comes in the box and do I need any extra parts for the H14SST-G?

The package contains the 384GB 6x64GB DDR5 4800 CL40 288-pin ECC RDIMM kit only; no cables, brackets or additional hardware are included, and the motherboard accepts the 288-pin RDIMM form factor directly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.