Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules without heat spreaders, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 192GB 2x96GB CL40 1.1V Supermicro H14DST-FL memory upgrade

SKU CH-8P12-J2MWD

192 GB DDR5-4800 ECC registered RDIMM kit (2 × 96 GB, CL40, 1.1 V) validated for Supermicro H14DST-FL servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Näytä 30 muuta kokoonpanoa
  • 192 GB capacity with 2 × 96 GB modules for maximum server density
  • DDR5 4800 speed delivers rated throughput on Supermicro H14DST-FL
  • CL40 latency and 1.1 V operation match controller expectations exactly
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 2Rx4 288-pin RDIMM form factor fits board population rules precisely

192GB DDR5 RDIMM kit for Supermicro H14DST-FL

This 192GB kit contains two 96GB DDR5 4800 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. Registered ECC architecture with CL40 latency and 1.1V operation delivers the stability required for enterprise server workloads. It is designed for administrators who need maximum registered capacity on this specific platform.

Verify motherboard population rules before ordering

The H14DST-FL requires 288-pin Registered RDIMMs and enforces strict DIMM population order for full capacity recognition. Consult the motherboard manual for supported capacities per channel and the approved installation sequence before purchase. Using unregistered or UDIMM modules will prevent the system from posting.

Lifetime replacement warranty

The kit ships as a matched pair of 96GB modules with no heat spreaders included. Backing the hardware is a lifetime replacement warranty plus free US-based technical support for installation and troubleshooting assistance. This service coverage replaces the modules if they fail and provides direct access to engineers familiar with Supermicro memory validation.

Kohokohdat

  • 192 GB capacity with 2 × 96 GB modules for maximum server density
  • DDR5 4800 speed delivers rated throughput on Supermicro H14DST-FL
  • CL40 latency and 1.1 V operation match controller expectations exactly
  • Registered ECC architecture offloads controller and corrects single-bit errors
  • 2Rx4 288-pin RDIMM form factor fits board population rules precisely

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the NEMIX RAM 192GB kit include everything needed to install in a Supermicro H14DST-FL, or are extra components required?

The kit contains two 96GB DDR5 4800 RDIMMs (2Rx4, CL40, 1.1V). No additional parts are needed for installation in the compatible Supermicro H14DST-FL motherboard.

How do I decide between the 96GB single-module and the 2x96GB 192GB kit for my Supermicro H14DST-FL?

Choose the 192GB 2x96GB kit when you need the full 192GB capacity across two slots; select a single 96GB module only if you are adding to an existing identical DIMM or populating a specific slot per the board's population rules.

What does the DDR5 4800 CL40 rating mean for real-world performance in a Supermicro H14DST-FL server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, delivering the exact speed and timing the H14DST-FL memory controller expects for stable, full-capacity operation with ECC error correction.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.