Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 192GB 2x96GB CL40 1.1V Supermicro H13SST-GC

SKU CH-HDM2-R4RCS

192 GB DDR5 4800 ECC registered RDIMM kit (2 × 96 GB, CL40, 1.1 V, 2Rx4) validated for Supermicro H13SST-GC

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Näytä 24 muuta kokoonpanoa
  • Full 192 GB capacity recognised at rated DDR5 4800 speed
  • Registered ECC architecture corrects single-bit errors on the fly
  • 2Rx4 dual-rank organisation fills every slot at full density
  • 1 V operation matches the motherboard's memory controller spec
  • Verified fitment for Supermicro H13SST-GC 288-pin RDIMM slots

Exact-match DDR5 kit for Supermicro H13SST-GC

This 192GB kit delivers two 96GB DDR5 4800 RDIMMs built to the board's precise rank, voltage and timing expectations. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It targets administrators who need maximum capacity on this specific platform without guesswork.

Verify manual before ordering

Server memory support varies by model and BIOS revision. Check your system or motherboard manual for approved DIMM population order, maximum capacity per slot and any firmware requirements before purchase. The 288-pin Registered form factor is mandatory; UDIMM or SODIMM modules will not fit or function.

Sustained-load behaviour

Registered buffering offloads the memory controller so all channels remain stable when fully populated under continuous workloads. ECC correction operates transparently during extended operations, preventing silent data corruption that can accumulate over time. The 1.1V operating voltage keeps power draw consistent across long-running server tasks.

Kohokohdat

  • Full 192 GB capacity recognised at rated DDR5 4800 speed
  • Registered ECC architecture corrects single-bit errors on the fly
  • 2Rx4 dual-rank organisation fills every slot at full density
  • 1 V operation matches the motherboard's memory controller spec
  • Verified fitment for Supermicro H13SST-GC 288-pin RDIMM slots

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the 192GB kit and is anything else required for installation?

The kit includes two 96GB DDR5-4800 Registered ECC RDIMMs, part number MR38400-9624K2. No extra parts are needed; install them into the Supermicro H13SST-GC following the motherboard manual's population order.

Should I choose this 2x96GB kit or a different capacity for the H13SST-GC?

This 192GB (2x96GB) kit matches the board's DDR5-4800 Registered ECC 2Rx4 specification at 1.1V CL40. Use it when your workload needs that full capacity; otherwise select a smaller validated kit that follows the same population rules.

What does the DDR5-4800 CL40 rating mean once the modules are running in the server?

The modules operate at 4800 MT/s with a CAS latency of 40 cycles at 1.1V. Registered buffering and on-die ECC let every slot run fully populated at that rated speed while correcting single-bit errors in real time.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.