Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 384GB (6×64GB) CL40 1.1V 2Rx4 288-pin memory upgrade

SKU CH-MXMK-SSA0C

384GB DDR5-4800 ECC Registered RDIMM kit (6×64GB) validated for Supermicro H14DSG-O-CPU servers

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB capacity with six 64 GB modules for dense server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • CL40 latency at 1.1 V for efficient registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor validated for Supermicro H14DSG-O-CPU motherboard

Exact-match DDR5 server kit

This 384GB kit delivers six 64GB DDR5 4800 RDIMMs built to the Supermicro H14DSG-O-CPU motherboard's exact rank, voltage and timing requirements. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors before they reach production workloads.

288-pin registered form factor

Modules use the 288-pin RDIMM interface this board requires, not UDIMM or SODIMM, and operate at 1.1V with CL40 latency. Major OEM Samsung, Micron or Hynix chips provide enterprise stability without a heat spreader, relying on server chassis airflow for cooling.

Upgrades from lower-capacity DDR5 RDIMMs

The jump is worth it when your workload needs the full 384GB ceiling this motherboard supports and you can follow the manual's population order. Buyers who need a different DIMM type, non-ECC operation or a smaller maximum capacity should verify their platform's qualified-vendor list first.

Kohokohdat

  • 384 GB capacity with six 64 GB modules for dense server workloads
  • DDR5 4800 speed rated at PC5-38400 for high-throughput data paths
  • CL40 latency at 1.1 V for efficient registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor validated for Supermicro H14DSG-O-CPU motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the DDR5 4800 interface limit the kit to PC5-38400 speeds?

The kit is rated for DDR5 4800 (PC5-38400) and will operate at that speed when the motherboard memory controller supports it.

Will the 288-pin RDIMM modules fit the Supermicro H14DSG-O-CPU motherboard?

The 288-pin Registered RDIMM form factor matches the board's DIMM slots; UDIMM or SODIMM modules would not fit.

How should the six 64GB modules be installed, and what step is often missed?

Follow the motherboard manual's population order for all six slots; the step often missed is verifying the exact slot sequence before inserting modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.