Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 5600 384GB (6x64GB) ECC RDIMM CL46 1.1V 2Rx4 288-pin Kit for GIGABYTE MS34-CP0

SKU CH-R111-N6JNV

A 384 GB DDR5 registered ECC kit of six 64 GB RDIMMs running at 5600 MT/s with CL46 latency and 1.1 V for the GIGABYTE MS34-CP0 motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Näytä 18 muuta kokoonpanoa
  • Massive 384GB capacity from six 64GB modules for memory-intensive server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the GIGABYTE MS34-CP0
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10V operation at 2Rx4 rank matches the board's voltage and population requirements
  • 288-pin RDIMM form factor ensures exact fitment in the server's DDR5 slots

Server DDR5 ECC RDIMM Kit

This NEMIX RAM kit delivers 384GB of DDR5 memory across six 64GB Registered ECC RDIMMs. It runs at 5600MHz with CL46 latency at 1.10V using 2Rx4 organisation. The 288-pin modules are built with major OEM chips and are specified for the GIGABYTE MS34-CP0 motherboard.

For Populated Server Slots

This kit suits administrators who need maximum registered ECC capacity on the validated platform and can populate all six slots. It is not for systems that require unbuffered UDIMMs or SODIMM form factors. Buyers whose boards limit total capacity below 384GB or enforce different population rules should verify the manual before ordering.

Ready-to-Install Matched Set

The six modules ship as a single matched kit so the memory controller sees identical rank, voltage and timing on every channel. No extra software, heat spreaders or cables are included. The packaging simply provides the six RDIMMs for immediate installation in the supported server.

Kohokohdat

  • Massive 384GB capacity from six 64GB modules for memory-intensive server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the GIGABYTE MS34-CP0
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 10V operation at 2Rx4 rank matches the board's voltage and population requirements
  • 288-pin RDIMM form factor ensures exact fitment in the server's DDR5 slots

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does my GIGABYTE MS34-CP0 motherboard need a specific BIOS revision before I install this 6x64GB DDR5 5600 kit?

The kit is verified for the MS34-CP0 at DDR5 5600 CL46 1.1V. Check the motherboard manual for the exact DIMM population order and any BIOS version required for full 384GB capacity.

Can I keep my existing DDR5 4800 RDIMMs and add these CL46 modules to the same board?

Mixing speeds or timings forces all slots to run at the lowest common setting, so the 5600MHz modules would drop to 4800MHz and CL46 may not apply.

How do I confirm the server sees all 384GB at the rated 5600MHz after installation?

Enter BIOS or UEFI and verify total memory reads 384GB, speed shows 5600MT/s (PC5-44800), and ECC is reported active on every channel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.