Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green circuit boards with black memory chips and gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 384GB 4x96GB CL46 1.1V 288-pin memory upgrade

SKU CH-2DSK-H8SWM

A 384GB kit of four 96GB DDR5-5600 registered ECC RDIMMs at 1.1V CL46, validated for the GIGABYTE MS34-CP0 motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Näytä 18 muuta kokoonpanoa
  • 384 GB total capacity from four 96 GB modules enables dense server memory configurations
  • DDR5 5600 speed with CL46 latency delivers rated throughput for compatible GIGABYTE MS34-CP0 systems
  • Registered ECC architecture corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operating voltage matches the platform specification for stable full-population operation
  • 288-pin RDIMM form factor fits the required server memory slots exactly

Capacity and fit

This 384GB kit contains four 96GB DDR5 RDIMMs rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. The modules are built as 2Rx4 Registered ECC parts that match the GIGABYTE MS34-CP0 motherboard's memory-population rules so the system recognises the full capacity at rated speed.

Thermals and power

Each module runs at 1.10V without a heat spreader, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller when all slots are populated, helping the platform maintain stable power delivery under sustained enterprise workloads.

Build and daily use

The 288-pin RDIMM form factor fits only boards that require Registered DIMMs; it will not work in UDIMM or SODIMM slots. ECC corrects single-bit errors on the fly to prevent silent data corruption, while the exact rank, voltage and timing specification avoids population-order issues during installation.

Kohokohdat

  • 384 GB total capacity from four 96 GB modules enables dense server memory configurations
  • DDR5 5600 speed with CL46 latency delivers rated throughput for compatible GIGABYTE MS34-CP0 systems
  • Registered ECC architecture corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operating voltage matches the platform specification for stable full-population operation
  • 288-pin RDIMM form factor fits the required server memory slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin RDIMMs in the GIGABYTE MS34-CP0, and which slot-population rule do people miss?

Power down, open the chassis, and insert each 96GB module into the 288-pin DDR5 RDIMM slots following the motherboard manual's exact population sequence for 4x 2Rx4 DIMMs; the step most often missed is skipping the prescribed slot order, which prevents the 384GB kit from being recognised at full capacity.

What maintenance or replacement will this 384GB DDR5 ECC RDIMM kit need later?

No scheduled maintenance is required; the modules have no heat spreaders and run at 1.1V, so only a failed DIMM would need replacing, which is covered by the lifetime replacement warranty.

What limit appears first when the 4x 96GB 2Rx4 RDIMMs run sustained workloads at DDR5 5600 CL46?

The registered buffer and ECC logic keep every slot stable at the rated 5600 MT/s, so the first practical ceiling is the motherboard's maximum supported capacity and population rules rather than a thermal or signal-integrity limit on the modules themselves.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.