Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5 5600 ECC UDIMM 64GB 4x16GB CL46 1.1V memory upgrade

SKU CH-0DBW-Z8KN1

A 64GB DDR5 kit of four 16GB ECC UDIMM modules at 5600MHz with CL46 latency and 1.1V operation for Supermicro X13SAW-F compatibility

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

  • 64 GB total capacity in a 4 × 16 GB kit for full Supermicro X13SAW-F population
  • DDR5 5600 PC5-44800 speed matches the motherboard's rated memory controller specification
  • ECC error correction detects and corrects single-bit faults to prevent silent data corruption
  • Unbuffered 288-pin UDIMM form factor fits the board's required DIMM slot type exactly
  • 1 V CL46 1Rx8 timing ensures stable operation at the platform's default voltage and latency

64GB DDR5 ECC UDIMM Kit for Supermicro X13SAW-F

This 64GB kit contains four 16GB DDR5 5600 unbuffered ECC UDIMMs built with major OEM chips. It matches the exact rank, voltage and timing the motherboard memory controller expects so the system recognises full capacity at rated speed. The 288-pin modules install directly into the board's DDR5 slots.

Who this suits and who should look elsewhere

This kit suits administrators upgrading a Supermicro X13SAW-F motherboard that requires 1Rx8 unbuffered ECC UDIMMs at 1.1V CL46. Builders needing registered DIMMs, SODIMMs, non-ECC modules or a different capacity per DIMM should select a different product.

DDR5 5600 CL46 1.1V 1Rx8 specification decides fit

The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.10V in a 1Rx8 unbuffered ECC configuration. If your board demands a different speed, voltage, rank or ECC type this kit will not operate correctly.

Kohokohdat

  • 64 GB total capacity in a 4 × 16 GB kit for full Supermicro X13SAW-F population
  • DDR5 5600 PC5-44800 speed matches the motherboard's rated memory controller specification
  • ECC error correction detects and corrects single-bit faults to prevent silent data corruption
  • Unbuffered 288-pin UDIMM form factor fits the board's required DIMM slot type exactly
  • 1 V CL46 1Rx8 timing ensures stable operation at the platform's default voltage and latency

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 288-pin DDR5 UDIMM modules fit the Supermicro X13SAW-F motherboard slots?

Yes, the kit uses the exact 288-pin DDR5 unbuffered ECC UDIMM form factor that the X13SAW-F requires, not an RDIMM or SODIMM.

What BIOS setting or population order is often missed when installing four 1Rx8 sticks?

The motherboard manual specifies the approved DIMM population sequence for four modules; follow that order so the memory controller recognises all 64 GB at DDR5-5600.

Does the lack of a heat spreader mean the modules need extra airflow or replacement over time?

The modules run at 1.10 V without a spreader; ensure the chassis provides adequate airflow over the DIMM slots, but no scheduled replacement is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.