Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules in a clear blister pack

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 128GB (2x64GB) CL52 1.1V 4Rx4 memory upgrade

SKU CH-3KWM-9N1PP

128 GB DDR5-6400 ECC registered server memory kit, CL52 1.1 V 4Rx4, validated for Supermicro X14SDW-42C-SP9F

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

  • Full-speed operation at rated DDR5 6400 CL52 with 1.1 V timing
  • 128 GB total capacity from two 64 GB registered ECC modules
  • 4Rx4 registered design keeps every slot stable at full population
  • Verified fit for Supermicro X14SDW-42C-SP9F motherboard memory rules
  • Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Exact-Match DDR5 Server Memory Kit

This 128 GB kit consists of two 64 GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency. Registered ECC architecture and 1.1 V operation meet the strict timing and voltage requirements of the target platform. It is built for administrators who need guaranteed recognition at full capacity on the specified Supermicro motherboard.

Verified Fitment for Supermicro X14SDW

The modules use the 288-pin RDIMM form factor that this board requires, not UDIMM or SODIMM. Registered buffering offloads the memory controller so every slot can run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Buyers who need a different form factor or non-ECC memory should look elsewhere.

Sustained Enterprise Stability

Registered design maintains signal integrity across all populated slots during continuous workloads. ECC protection operates constantly to catch and correct errors before they affect production systems. The 1.1 V operating voltage supports efficient long-term deployment. Systems requiring higher frequencies or lower latencies than CL52 will not be served by this kit.

Kohokohdat

  • Full-speed operation at rated DDR5 6400 CL52 with 1.1 V timing
  • 128 GB total capacity from two 64 GB registered ECC modules
  • 4Rx4 registered design keeps every slot stable at full population
  • Verified fit for Supermicro X14SDW-42C-SP9F motherboard memory rules
  • Major OEM Samsung, Micron or Hynix chips for enterprise-grade reliability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What CAS latency will the kit run at when fully populated on the Supermicro X14SDW-42C-SP9F?

The modules are rated CL52 at DDR5-6400 and will operate at that timing when the motherboard applies its validated profile.

How much heat do two 64 GB RDIMMs without spreaders add to a fully populated chassis running all day?

Registered DDR5 at 1.10 V and 6400 MT/s draws minimal power per module; total thermal load is well within standard server airflow limits.

Which motherboard slot layout and memory population rules must already be in place for this 2x64 GB kit to work?

The Supermicro X14SDW-42C-SP9F requires 288-pin Registered DDR5 DIMMs; consult its manual for supported capacities, approved DIMM population order, and installation steps before purchase.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.