Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 256GB 8x32GB CL52 1.1V 2Rx4 Supermicro X14SRA-F memory upgrade

SKU CH-YXBW-CVA86

256GB server memory kit of eight 32GB DDR5 ECC RDIMMs running at 6400MHz with CL52 latency and 1.1V registered operation for Supermicro X14SRA-F

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Näytä 4 muuta kokoonpanoa
  • 256 GB capacity across eight 32 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for maximum memory throughput
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage and CL52 latency match the Supermicro X14SRA-F memory controller exactly
  • 288-pin RDIMM form factor validated for the target motherboard ensuring correct fit and recognition

System-Specific DDR5 Memory Kit

This NEMIX RAM kit delivers 256 GB across eight 32 GB DDR5-6400 RDIMMs built for the Supermicro X14SRA-F motherboard. Registered ECC operation at 1.1 V and CL52 latency matches the board's memory controller expectations for full-capacity recognition and rated-speed operation.

Exact-Match Upgrade Path

The kit replaces partial or lower-capacity DDR5 RDIMM sets when the server requires the precise 2Rx4 rank structure, registered buffering, and ECC error correction this platform demands. The jump is worth it when all eight slots must be populated at full speed without controller overload or silent data corruption.

Enterprise Server Builders

Suits administrators expanding a Supermicro X14SRA-F system to its maximum validated memory configuration with factory-matched modules. Not for desktop or workstation boards that accept only unbuffered UDIMMs, nor for platforms requiring different pin counts, voltages, or rank organisations.

Kohokohdat

  • 256 GB capacity across eight 32 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for maximum memory throughput
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage and CL52 latency match the Supermicro X14SRA-F memory controller exactly
  • 288-pin RDIMM form factor validated for the target motherboard ensuring correct fit and recognition

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 288-pin DDR5 RDIMM modules fit the memory slots on my Supermicro X14SRA-F motherboard?

Yes, the kit uses the 288-pin Registered RDIMM form factor that the X14SRA-F requires, so each module seats directly in the board's DDR5 DIMM slots without adapters.

What population order should I follow when installing all eight 32 GB modules?

Install the modules in the exact slot sequence shown in the Supermicro X14SRA-F manual; the board's population rules dictate which channels fill first to achieve the full 256 GB at DDR5-6400.

Do these Registered ECC modules need any firmware updates or periodic reconfiguration after installation?

No, the DDR5-6400 CL52 1.1 V modules operate at their rated settings once the BIOS detects them; ECC and registered buffering function automatically with no ongoing maintenance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.