Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 256GB 8x32GB CL52 1.1V 2Rx4 Supermicro X14SRA-F memory upgrade

SKU CH-YXBW-CVA86

256GB server memory kit of eight 32GB DDR5 ECC RDIMMs running at 6400MHz with CL52 latency and 1.1V registered operation for Supermicro X14SRA-F

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Zobrazit dalších 4 konfigurací
  • 256 GB capacity across eight 32 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for maximum memory throughput
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage and CL52 latency match the Supermicro X14SRA-F memory controller exactly
  • 288-pin RDIMM form factor validated for the target motherboard ensuring correct fit and recognition

System-Specific DDR5 Memory Kit

This NEMIX RAM kit delivers 256 GB across eight 32 GB DDR5-6400 RDIMMs built for the Supermicro X14SRA-F motherboard. Registered ECC operation at 1.1 V and CL52 latency matches the board's memory controller expectations for full-capacity recognition and rated-speed operation.

Exact-Match Upgrade Path

The kit replaces partial or lower-capacity DDR5 RDIMM sets when the server requires the precise 2Rx4 rank structure, registered buffering, and ECC error correction this platform demands. The jump is worth it when all eight slots must be populated at full speed without controller overload or silent data corruption.

Enterprise Server Builders

Suits administrators expanding a Supermicro X14SRA-F system to its maximum validated memory configuration with factory-matched modules. Not for desktop or workstation boards that accept only unbuffered UDIMMs, nor for platforms requiring different pin counts, voltages, or rank organisations.

Přednosti

  • 256 GB capacity across eight 32 GB modules for high-density server workloads
  • DDR5 6400 speed rated at PC5-51200 for maximum memory throughput
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage and CL52 latency match the Supermicro X14SRA-F memory controller exactly
  • 288-pin RDIMM form factor validated for the target motherboard ensuring correct fit and recognition

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 288-pin DDR5 RDIMM modules fit the memory slots on my Supermicro X14SRA-F motherboard?

Yes, the kit uses the 288-pin Registered RDIMM form factor that the X14SRA-F requires, so each module seats directly in the board's DDR5 DIMM slots without adapters.

What population order should I follow when installing all eight 32 GB modules?

Install the modules in the exact slot sequence shown in the Supermicro X14SRA-F manual; the board's population rules dictate which channels fill first to achieve the full 256 GB at DDR5-6400.

Do these Registered ECC modules need any firmware updates or periodic reconfiguration after installation?

No, the DDR5-6400 CL52 1.1 V modules operate at their rated settings once the BIOS detects them; ECC and registered buffering function automatically with no ongoing maintenance.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.