NEMIX RAM
NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1Rx8 UDIMM memory upgrade
- 8GB
- 288-Pin DDR5 UDIMM
105,99 $
0.00137451BTC
Varastossa
NEMIX RAM
NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1.1V 288-Pin UDIMM Supermicro X13SAE memory upgrade
8GB DDR5 5600 CL46 1.1V UDIMM built with major OEM chips and verified for Supermicro X13SAE motherboards
- Capacity8GB
- Type288-Pin DDR5 UDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCNo
- Exact-match DDR5-5600 upgrade for Supermicro X13SAE
- 8GB single-rank module runs at rated 5600 speed
- Major OEM chips tested at 1.1V CL46 timing
- 288-pin UDIMM fits board memory slots
- Lifetime replacement warranty with US-based support
Supermicro X13SAE DDR5 upgrade
This 8GB DDR5 module is built to the exact specification the Supermicro X13SAE motherboard expects: 5600 MT/s, CL46, 1.1 V, 1Rx8, non-ECC, unbuffered, 288-pin UDIMM. It uses major OEM chips and is tested so the board recognises the full capacity and runs at the rated speed without manual tuning.
Builders with a single DIMM slot
The kit provides one 8 GB stick, so systems that require multiple ranks per channel or higher total memory for virtualisation, heavy rendering or large datasets should look at larger kits or multi-module configurations. Boards that only accept ECC or registered DIMMs cannot use this module.
Package contains only the memory stick
No heat spreader, software, cables or additional hardware are included. The upgrade relies on the motherboard's own cooling and BIOS to operate at the specified voltage and timing.
Kohokohdat
- Exact-match DDR5-5600 upgrade for Supermicro X13SAE
- 8GB single-rank module runs at rated 5600 speed
- Major OEM chips tested at 1.1V CL46 timing
- 288-pin UDIMM fits board memory slots
- Lifetime replacement warranty with US-based support
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-818K1 |
| Capacity | 8GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Tämän mallin muut versiot
5 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
NEMIX RAM
NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1.1V 1Rx8 288-pin UDIMM memory upgrade
- 8GB
- 288-Pin DDR5 UDIMM
108,99 $
0.00141342BTC
Varastossa
NEMIX RAM
NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1.1V 1Rx8 UDIMM memory upgrade
- 8GB
- 288-Pin DDR5 UDIMM
109,99 $
0.00142639BTC
Varastossa
NEMIX RAM
NEMIX RAM 8GB DDR5 5600 CL46 1.1V 1Rx8 UDIMM NZXT N7 B850 memory upgrade
- 8GB
- 288-Pin DDR5 UDIMM
112,99 $
0.00146529BTC
Varastossa
NEMIX RAM
NEMIX RAM 8GB DDR5 5600MHz CL46 1.1V 288-Pin UDIMM MSI MPG X870E Carbon Memory Upgrade
- 8GB
- 288-Pin DDR5 UDIMM
115,99 $
0.0015042BTC
VarastossaKysymyksiä tästä tuotteesta
Does my Supermicro X13SAE motherboard need a DDR5 slot for this 5600 CL46 UDIMM?
Yes, the module is a 288-pin DDR5 UDIMM and requires a DDR5 DIMM slot on the X13SAE to operate.
Can I keep my existing DDR5 memory and add this 1Rx8 1.10V kit alongside it?
The X13SAE supports mixed 1Rx8 modules at 1.10V; populate slots per the manual and the board will train all sticks to 5600 CL46.
How do I confirm the stick is running at PC5-44800 after installation?
Open BIOS or a tool like CPU-Z and verify the memory reports 5600 MT/s, CL46 timings and 1.10V.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278806BTC
Varastossa
