Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM MD44800-818K1 8GB DDR5 5600 CL46 1.1V 288-Pin UDIMM Supermicro X13SAE memory upgrade

SKU CH-2GDF-36H7E

8GB DDR5 5600 CL46 1.1V UDIMM built with major OEM chips and verified for Supermicro X13SAE motherboards

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact-match DDR5-5600 upgrade for Supermicro X13SAE
  • 8GB single-rank module runs at rated 5600 speed
  • Major OEM chips tested at 1.1V CL46 timing
  • 288-pin UDIMM fits board memory slots
  • Lifetime replacement warranty with US-based support

Supermicro X13SAE DDR5 upgrade

This 8GB DDR5 module is built to the exact specification the Supermicro X13SAE motherboard expects: 5600 MT/s, CL46, 1.1 V, 1Rx8, non-ECC, unbuffered, 288-pin UDIMM. It uses major OEM chips and is tested so the board recognises the full capacity and runs at the rated speed without manual tuning.

Builders with a single DIMM slot

The kit provides one 8 GB stick, so systems that require multiple ranks per channel or higher total memory for virtualisation, heavy rendering or large datasets should look at larger kits or multi-module configurations. Boards that only accept ECC or registered DIMMs cannot use this module.

Package contains only the memory stick

No heat spreader, software, cables or additional hardware are included. The upgrade relies on the motherboard's own cooling and BIOS to operate at the specified voltage and timing.

Points forts

  • Exact-match DDR5-5600 upgrade for Supermicro X13SAE
  • 8GB single-rank module runs at rated 5600 speed
  • Major OEM chips tested at 1.1V CL46 timing
  • 288-pin UDIMM fits board memory slots
  • Lifetime replacement warranty with US-based support

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Does my Supermicro X13SAE motherboard need a DDR5 slot for this 5600 CL46 UDIMM?

Yes, the module is a 288-pin DDR5 UDIMM and requires a DDR5 DIMM slot on the X13SAE to operate.

Can I keep my existing DDR5 memory and add this 1Rx8 1.10V kit alongside it?

The X13SAE supports mixed 1Rx8 modules at 1.10V; populate slots per the manual and the board will train all sticks to 5600 CL46.

How do I confirm the stick is running at PC5-44800 after installation?

Open BIOS or a tool like CPU-Z and verify the memory reports 5600 MT/s, CL46 timings and 1.10V.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.