Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM ME23400-818K2 16GB 2x8GB DDR4 2933 ECC UDIMM memory upgrade

SKU CH-F1DX-C5ASF

16 GB DDR4 2933 MHz ECC UDIMM kit with 1.2 V CL21 timing for Supermicro X12SCZ motherboards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • ECC protects data integrity by correcting single-bit errors on the fly
  • Exact-match DDR4-2933 kit runs at rated speed with CL21 timing and 1.2V
  • Verified fit for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
  • 16GB dual-channel capacity from two 8GB 1Rx8 unbuffered UDIMMs
  • Lifetime replacement warranty with free US-based technical support

Targeted DDR4 ECC upgrade

This 16 GB kit contains two 8 GB DDR4 2933 modules built to the exact rank, voltage and timing the Supermicro X12SCZ-F and X12SCZ-TLN4F memory controllers expect. The 288-pin unbuffered ECC UDIMM form factor matches the board's population rules so the full capacity is recognised at rated speed without manual tuning.

Sustained data integrity

On-board ECC detects and corrects single-bit errors during continuous operation, preventing silent corruption that can accumulate in long-running workloads. The 1.2 V, CL21 modules maintain their specified throughput without throttling when the system is under constant memory pressure.

Cool, quiet, efficient operation

Bare modules without heat spreaders rely on the chassis airflow already present in Supermicro platforms, adding no audible noise. Each DIMM draws only 1.20 V at standard DDR4 power levels, keeping the thermal contribution low even when all slots are populated.

Kohokohdat

  • ECC protects data integrity by correcting single-bit errors on the fly
  • Exact-match DDR4-2933 kit runs at rated speed with CL21 timing and 1.2V
  • Verified fit for Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards
  • 16GB dual-channel capacity from two 8GB 1Rx8 unbuffered UDIMMs
  • Lifetime replacement warranty with free US-based technical support

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 1.2 V rating keep power draw and heat low during continuous operation?

Yes — the modules run at 1.20 V standard DDR4 voltage, so they draw minimal power and generate little heat even under all-day workloads.

Must the motherboard be a Supermicro X12SCZ-F or X12SCZ-TLN4F with 288-pin DDR4 ECC UDIMM slots?

The kit is validated for those exact boards; other systems need 288-pin DDR4 ECC UDIMM slots and must support 2933 MT/s, CL21, 1Rx8 unbuffered modules.

Will the CL21 timing work with slower DDR4 ECC UDIMMs already installed?

The memory controller will run all populated slots at the lowest common speed and latency, so slower modules will dictate the final timing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.