Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OEM Industries

OEM Industries 3108NL-04W-B30 80mm 12V .19A 2-Wire Ball Bearing Fan

SKU CH-1X8F-RRQSA

An 80mm ball-bearing case fan running at 12V and .19A with a two-wire power connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • Ball-bearing design reduces friction for longer life
  • 12 V operation draws only 0.19 A for low power use
  • Compact 80 mm frame fits tight case spaces
  • Simple two-wire connection eases installation
  • NMB 8020 series built for reliable case cooling

Compact 80 mm case fan

The OEM Industries 3108NL-04W-B30 is an 80 mm ball-bearing fan designed for general case airflow. It runs on 12 V at 0.19 A and connects with a two-wire lead. The black frame and lack of LEDs keep the appearance neutral inside any chassis.

Suits basic cooling upgrades

Builders replacing a worn 80 mm exhaust or intake fan will find a direct mechanical match. Systems that require PWM speed control, higher static pressure for dense heatsinks, or larger mounting patterns should look elsewhere.

Two-wire power connector

The fan uses a simple two-wire interface, so speed is fixed at full voltage unless the motherboard or controller supports voltage regulation. Verify that your header can drive a 12 V 0.19 A two-wire device before purchasing.

Kohokohdat

  • Ball-bearing design reduces friction for longer life
  • 12 V operation draws only 0.19 A for low power use
  • Compact 80 mm frame fits tight case spaces
  • Simple two-wire connection eases installation
  • NMB 8020 series built for reliable case cooling

Tekniset tiedot

Model3108NL-04W-B30
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Kysymyksiä tästä tuotteesta

What power connector does the 3108NL-04W-B30 need from my power supply?

The fan uses a simple two-wire lead that connects directly to a 12 V supply rail or a standard two-pin header on the motherboard or fan controller.

Will this 80 mm ball-bearing unit fit the screw pattern of my older 8020-style chassis fan mount?

Yes, the 80 mm frame follows the common 8020 mounting hole spacing so it drops into legacy case or heatsink brackets without adapters.

How can I confirm the 3108NL-04W-B30 is spinning at the correct speed after installation?

Check the motherboard BIOS or a hardware-monitoring utility; it should report a steady RPM reading for the connected header, and you should feel consistent airflow from the black blades.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.