暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80mm square cooling fan with two wires and ball bearing

OEM Industries

OEM Industries 3108NL-04W-B30 80mm 12V .19A 2-Wire Ball Bearing Fan

SKU CH-1X8F-RRQSA

An 80mm ball-bearing case fan running at 12V and .19A with a two-wire power connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • Ball-bearing design reduces friction for longer life
  • 12 V operation draws only 0.19 A for low power use
  • Compact 80 mm frame fits tight case spaces
  • Simple two-wire connection eases installation
  • NMB 8020 series built for reliable case cooling

Compact 80 mm case fan

The OEM Industries 3108NL-04W-B30 is an 80 mm ball-bearing fan designed for general case airflow. It runs on 12 V at 0.19 A and connects with a two-wire lead. The black frame and lack of LEDs keep the appearance neutral inside any chassis.

Suits basic cooling upgrades

Builders replacing a worn 80 mm exhaust or intake fan will find a direct mechanical match. Systems that require PWM speed control, higher static pressure for dense heatsinks, or larger mounting patterns should look elsewhere.

Two-wire power connector

The fan uses a simple two-wire interface, so speed is fixed at full voltage unless the motherboard or controller supports voltage regulation. Verify that your header can drive a 12 V 0.19 A two-wire device before purchasing.

特長

  • Ball-bearing design reduces friction for longer life
  • 12 V operation draws only 0.19 A for low power use
  • Compact 80 mm frame fits tight case spaces
  • Simple two-wire connection eases installation
  • NMB 8020 series built for reliable case cooling

仕様

Model3108NL-04W-B30
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

この商品に関する質問

What power connector does the 3108NL-04W-B30 need from my power supply?

The fan uses a simple two-wire lead that connects directly to a 12 V supply rail or a standard two-pin header on the motherboard or fan controller.

Will this 80 mm ball-bearing unit fit the screw pattern of my older 8020-style chassis fan mount?

Yes, the 80 mm frame follows the common 8020 mounting hole spacing so it drops into legacy case or heatsink brackets without adapters.

How can I confirm the 3108NL-04W-B30 is spinning at the correct speed after installation?

Check the motherboard BIOS or a hardware-monitoring utility; it should report a steady RPM reading for the connected header, and you should feel consistent airflow from the black blades.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。