OEM Industries
OEM Industries AQ1212HB-F51 120x38mm 12V .5A 2-Wire CPU cooler
A 120 mm dual-ball-bearing fan moves air through a 38 mm frame using 12 V at .5 A over two wires
- ColorBlack
- TypeFan only
- Fan Size120mm
- Bearing Type2 Ball
- Power Connector2 Wires
- LEDNo
- DC brushless motor reduces friction for longer life
- 2-ball bearing design withstands continuous server duty cycles
- 120 mm × 38 mm frame fits standard 120 mm mounts
- 12 V 0.5 A draw keeps power budget low
- Two-wire power connector simplifies installation in any chassis
120 mm DC brushless cooler
The OEM Industries AQ1212HB-F51 is a 120 mm by 38 mm DC brushless fan rated for 12 V and 0.5 A. It uses a two-wire power connector and a dual-ball bearing for continuous operation in server chassis or workstation enclosures.
Suited for 12 V two-wire headers
This cooler fits builds that require a 120 mm fan with a standard two-wire connection and 0.5 A current draw. It is not intended for systems that need PWM speed control, three- or four-pin headers, integrated LED lighting, or a heatsink assembly bundled with the fan.
Verify header and clearance
Confirm the motherboard or fan controller provides a 12 V two-pin header rated for at least 0.5 A. Ensure the 38 mm thickness clears surrounding components and that the mounting holes match a 120 mm pattern before ordering.
Kohokohdat
- DC brushless motor reduces friction for longer life
- 2-ball bearing design withstands continuous server duty cycles
- 120 mm × 38 mm frame fits standard 120 mm mounts
- 12 V 0.5 A draw keeps power budget low
- Two-wire power connector simplifies installation in any chassis
Tekniset tiedot
| Model | AQ1212HB-F51 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | 2 Ball |
| Power Connector | 2 Wires |
| LED | No |
Kysymyksiä tästä tuotteesta
Will the 12 V, 0.5 A rating let me run this fan from a standard motherboard CPU fan header?
Yes, the fan draws 0.5 A at 12 V, which is within the typical 1 A limit of most motherboard CPU fan headers.
Can I use the existing two-wire power lead from my old 120 mm fan to connect this AQ1212HB-F51?
Yes, this cooler uses a two-wire power connector, so it will plug directly into the same two-wire header or adapter you already have.
How can I confirm the 2-ball bearing fan is spinning correctly after installation?
Power the system, enter the BIOS hardware monitor or use a monitoring utility, and verify the CPU fan RPM reads a steady value above zero.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
