Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 70mm blower fan with 75 by 30mm housing and three wires

OEM Industries

OEM Industries D07F-24SS1 70mm blower fan 24V 0.16A 3-wire

SKU CH-HWRV-5Z88E

A 70 mm blower fan with a 75×30 mm frame, 24 V 0.16 A draw and a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeSleeve Bearing
  • LEDNo
  • Blower design directs airflow through tight 75×30 mm channels
  • NIDEC motor runs on 24 V at 0.16 A
  • 70 mm frame fits compact CPU cooler stacks
  • Sleeve bearing keeps operation simple and cost-effective
  • Three-wire lead provides power, ground and speed signal

Compact Blower Fan

The OEM Industries D07F-24SS1 is a 70 mm blower-style cooler designed for equipment that requires focused airflow in a 75 by 30 mm footprint. It operates on a 24 V supply drawing 0.16 A and connects via a three-wire lead. The unit uses a sleeve bearing and has no LED illumination.

Target Use Cases

This cooler suits technicians replacing an identical NIDEC 7530 blower in industrial or embedded systems that provide a 24 V header. It is not for builders who require a different voltage, a PWM control signal, or an LED option. It is also not for setups that need a larger frame or a different mounting pattern.

Deciding Specification

The 24 V 0.16 A electrical rating is the single figure that determines whether this blower will work in the target device; the fan will only function correctly when the host supplies exactly that voltage and current capability.

Kohokohdat

  • Blower design directs airflow through tight 75×30 mm channels
  • NIDEC motor runs on 24 V at 0.16 A
  • 70 mm frame fits compact CPU cooler stacks
  • Sleeve bearing keeps operation simple and cost-effective
  • Three-wire lead provides power, ground and speed signal

Tekniset tiedot

ModelD07F-24SS1
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeSleeve Bearing
LEDNo

Kysymyksiä tästä tuotteesta

Which version of the D07F-24SS1 blower should I pick for a 70 mm slot?

The fan is a single 70 mm blower rated at 24 V and 0.16 A with a three-wire lead; no other sizes or voltages are offered for this model.

What does the 0.16 A rating mean once the fan is installed?

At 24 V the unit draws 0.16 A, so it delivers a focused airstream suitable for spot-cooling VRMs, memory or small-form-factor chassis rather than high-volume case airflow.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal, letting the motherboard or fan controller monitor speed while the other two wires supply 24 V power and ground.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.