Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 70mm blower fan with 75 by 30mm housing and three wires

OEM Industries

OEM Industries D07F-24SS1 70mm blower fan 24V 0.16A 3-wire

SKU CH-HWRV-5Z88E

A 70 mm blower fan with a 75×30 mm frame, 24 V 0.16 A draw and a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeSleeve Bearing
  • LEDNo
  • Blower design directs airflow through tight 75×30 mm channels
  • NIDEC motor runs on 24 V at 0.16 A
  • 70 mm frame fits compact CPU cooler stacks
  • Sleeve bearing keeps operation simple and cost-effective
  • Three-wire lead provides power, ground and speed signal

Compact Blower Fan

The OEM Industries D07F-24SS1 is a 70 mm blower-style cooler designed for equipment that requires focused airflow in a 75 by 30 mm footprint. It operates on a 24 V supply drawing 0.16 A and connects via a three-wire lead. The unit uses a sleeve bearing and has no LED illumination.

Target Use Cases

This cooler suits technicians replacing an identical NIDEC 7530 blower in industrial or embedded systems that provide a 24 V header. It is not for builders who require a different voltage, a PWM control signal, or an LED option. It is also not for setups that need a larger frame or a different mounting pattern.

Deciding Specification

The 24 V 0.16 A electrical rating is the single figure that determines whether this blower will work in the target device; the fan will only function correctly when the host supplies exactly that voltage and current capability.

Pluspunten

  • Blower design directs airflow through tight 75×30 mm channels
  • NIDEC motor runs on 24 V at 0.16 A
  • 70 mm frame fits compact CPU cooler stacks
  • Sleeve bearing keeps operation simple and cost-effective
  • Three-wire lead provides power, ground and speed signal

Specificaties

ModelD07F-24SS1
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeSleeve Bearing
LEDNo

Vragen over dit artikel

Which version of the D07F-24SS1 blower should I pick for a 70 mm slot?

The fan is a single 70 mm blower rated at 24 V and 0.16 A with a three-wire lead; no other sizes or voltages are offered for this model.

What does the 0.16 A rating mean once the fan is installed?

At 24 V the unit draws 0.16 A, so it delivers a focused airstream suitable for spot-cooling VRMs, memory or small-form-factor chassis rather than high-volume case airflow.

What does the three-wire connection provide in practice?

The third wire carries a tachometer signal, letting the motherboard or fan controller monitor speed while the other two wires supply 24 V power and ground.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.