OEM Industries
OEM Industries MF50151V1-Q000-S99 50mm 4-pin fan
A 50 mm square cooler with maglev bearing and 4-pin PWM control runs on 12 V at 1.56 W
- ColorBlack
- TypeFan only
- Fan Size50mm
- Bearing TypeMaglev
- Power Connector4 Pin
- LEDNo
- Maglev bearing reduces friction for longer service life
- 50 mm square frame fits compact chassis layouts
- 4‑pin PWM connector enables precise speed control
- 12 V 1.56 W rating delivers efficient airflow
- Black finish suits stealth builds
50 mm Maglev Fan for Compact Cooling
This 50 mm square cooler uses a maglev bearing and a four-pin PWM connector to deliver targeted airflow in tight chassis. It suits builders working on small-form-factor systems or replacing a noisy stock fan on a low-profile heatsink.
Sustained Operation at 1.56 W
Rated at 12 V and 1.56 W, the motor maintains steady speed under continuous load without the wear associated with sleeve or ball bearings. The maglev design reduces friction, helping the fan keep consistent RPM and acoustic output over long sessions.
Straightforward Four-Pin Installation
The standard 4-pin header plugs directly into most motherboard fan connectors, enabling PWM control without adapters. Ensure the 50 mm by 15 mm frame clears surrounding components; the square profile can interfere with tall memory modules or voltage-regulator heatsinks in dense layouts.
Kohokohdat
- Maglev bearing reduces friction for longer service life
- 50 mm square frame fits compact chassis layouts
- 4‑pin PWM connector enables precise speed control
- 12 V 1.56 W rating delivers efficient airflow
- Black finish suits stealth builds
Tekniset tiedot
| Model | MF50151V1-Q000-S99 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 50mm |
| Bearing Type | Maglev |
| Power Connector | 4 Pin |
| LED | No |
Kysymyksiä tästä tuotteesta
How much heat and noise does the MF50151V1-Q000-S99 add when it runs continuously?
It draws 1.56 W at 12 V and uses a maglev bearing, so acoustic and thermal contribution stays very low during all-day operation.
What must my motherboard provide for this 4-pin cooler to function?
A standard 4-pin PWM header supplying 12 V is all that is required; the fan includes no LED or extra wiring.
Will the 50 mm square frame fit alongside my existing CPU cooler without fouling memory slots?
The compact 50 mm footprint and 15 mm thickness leave ample clearance for tall DIMMs and most tower coolers.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001043BTC
Varastossa