暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 50mm square cooling fan with 4-pin connector

OEM Industries

OEM Industries MF50151V1-Q000-S99 50mm 4-pin fan

SKU CH-P8AG-S0MCA

A 50 mm square cooler with maglev bearing and 4-pin PWM control runs on 12 V at 1.56 W

  • ColorBlack
  • TypeFan only
  • Fan Size50mm
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer service life
  • 50 mm square frame fits compact chassis layouts
  • 4‑pin PWM connector enables precise speed control
  • 12 V 1.56 W rating delivers efficient airflow
  • Black finish suits stealth builds

50 mm Maglev Fan for Compact Cooling

This 50 mm square cooler uses a maglev bearing and a four-pin PWM connector to deliver targeted airflow in tight chassis. It suits builders working on small-form-factor systems or replacing a noisy stock fan on a low-profile heatsink.

Sustained Operation at 1.56 W

Rated at 12 V and 1.56 W, the motor maintains steady speed under continuous load without the wear associated with sleeve or ball bearings. The maglev design reduces friction, helping the fan keep consistent RPM and acoustic output over long sessions.

Straightforward Four-Pin Installation

The standard 4-pin header plugs directly into most motherboard fan connectors, enabling PWM control without adapters. Ensure the 50 mm by 15 mm frame clears surrounding components; the square profile can interfere with tall memory modules or voltage-regulator heatsinks in dense layouts.

特長

  • Maglev bearing reduces friction for longer service life
  • 50 mm square frame fits compact chassis layouts
  • 4‑pin PWM connector enables precise speed control
  • 12 V 1.56 W rating delivers efficient airflow
  • Black finish suits stealth builds

仕様

ModelMF50151V1-Q000-S99
ColorBlack
TypeFan only
Fan Size50mm
Bearing TypeMaglev
Power Connector4 Pin
LEDNo

この商品に関する質問

How much heat and noise does the MF50151V1-Q000-S99 add when it runs continuously?

It draws 1.56 W at 12 V and uses a maglev bearing, so acoustic and thermal contribution stays very low during all-day operation.

What must my motherboard provide for this 4-pin cooler to function?

A standard 4-pin PWM header supplying 12 V is all that is required; the fan includes no LED or extra wiring.

Will the 50 mm square frame fit alongside my existing CPU cooler without fouling memory slots?

The compact 50 mm footprint and 15 mm thickness leave ample clearance for tall DIMMs and most tower coolers.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。