Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 288-pin DDR4 RDIMM modules in anti-static tray

OWC

OWC 128GB (2x64GB) DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC Registered RDIMM memory upgrade

SKU CH-N69Q-GGRNE

128 GB DDR4-2933 ECC registered RDIMM kit for Dell PowerEdge C4140 servers

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 128GB (2 x 64GB)

Näytä 4 muuta kokoonpanoa
  • ECC registered design protects data integrity in servers
  • 128 GB kit (2 × 64 GB) expands memory capacity
  • DDR4 2933 MHz CL21 speed matches system specs
  • 2 V operation reduces power draw
  • Compatible with PowerEdge C4140 and backward compatible with 2133, 2400, 2666 MHz

Server-grade DDR4 ECC RDIMM kit

This 128GB kit contains two 64GB DDR4 2933 ECC registered DIMMs built for the PowerEdge C4140 with SkyLake CPUs. It operates at 1.2V with CL21 latency and a 4Rx4 organisation. The modules are JEDEC and RoHS compliant and carry a limited lifetime warranty. They are designed for server and workstation workloads that require error-correcting registered memory.

Registered ECC limits and platform constraints

Registered ECC RDIMMs cannot be used in standard desktop computers and must not be mixed with unbuffered or load-reduced ECC modules. The kit runs at 2933 MT/s and is backward compatible with 2133, 2400 and 2666 MT/s bus speeds. All 288 pins follow the DDR4 RDIMM pinout, so the system must support registered memory and the corresponding memory controller configuration.

Upgrading from lower-capacity RDIMMs

The kit replaces smaller-capacity registered ECC DIMMs in the PowerEdge C4140, doubling or quadrupling memory per channel depending on the existing population. The jump is worth it when virtualisation, database or compute workloads exceed the current memory ceiling and the platform supports 64GB 4Rx4 modules. Buyers who need unbuffered memory or consumer form factors cannot use this product.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 128 GB kit (2 × 64 GB) expands memory capacity
  • DDR4 2933 MHz CL21 speed matches system specs
  • 2 V operation reduces power draw
  • Compatible with PowerEdge C4140 and backward compatible with 2133, 2400, 2666 MHz

Tekniset tiedot

BrandOWC
Part Number2R9D44R4128P
Capacity128GB (2 x 64GB)
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemPowerEdge C4140 (SkyLake CPU)

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I buy the 128GB kit as two 64GB modules or look for a different capacity?

This kit is sold only as a matched pair of two 64GB modules giving 128GB total; no other capacity is offered for this part number.

What does the 2933MHz speed rating deliver inside a PowerEdge C4140?

The modules run at DDR4 2933 (PC4-23400) with CL21 latency at 1.2V, and the C4140 (SkyLake CPU) will operate them at that rated frequency.

Will the 288-pin ECC Registered DDR4 interface work in my server?

Yes — the kit uses 288-pin DDR4 ECC Registered DIMMs, the exact form factor required by the PowerEdge C4140; it also supports backward compatibility with 2133, 2400 and 2666MHz bus speeds.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.