OWC 64GB (4x16GB) DDR4 2666 ECC Registered RDIMM for Synology Flashstation SA6400 server RAM
- 64GB (4 x 16GB)
- 288-Pin DDR4 SDRAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
A 128 GB DDR4-2666 ECC registered quad-channel kit of four 32 GB RDIMMs for compatible servers and NAS systems
Capacity 128GB (4 x 32GB)
This kit provides 128GB of DDR4 2666 ECC Registered memory across four 32GB modules. It is built for servers, workstations and NAS platforms that require registered DIMMs. Standard desktop computers cannot use this memory because they lack the necessary memory controller support.
ECC circuitry corrects single-bit errors in real time, protecting data integrity during long compute or storage tasks. Registered buffering reduces electrical load on the memory controller, allowing all four modules to run at the rated 2666 MT/s without signal degradation. The kit is also backward compatible with 2133 and 2400 MT/s systems.
Each module uses the standard 288-pin DDR4 form factor and operates at 1.2V, so it fits any DDR4 RDIMM slot. The registered design means it must not be mixed with unbuffered or load-reduced DIMMs; doing so will prevent the system from posting. No heat spreaders are present, so clearance is minimal.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R4128S |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each module operates at 1.2V, the standard DDR4 voltage, so total draw stays within the platform's registered DIMM power budget for 24/7 NAS workloads.
The SA6400 needs free 288-pin DDR4 slots that support registered ECC DIMMs; the system's memory controller must be configured for registered modules, not unbuffered or load-reduced types.
Yes, the kit is backward compatible with 2133MHz and 2400MHz speeds; all populated slots will run at the lowest common frequency and matched timings.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?