OWC 64GB (4x16GB) DDR4 2666 ECC Registered RDIMM for Synology Flashstation SA6400 server RAM
- 64GB (4 x 16GB)
- 288-Pin DDR4 SDRAM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
OWC
A 128 GB DDR4-2666 ECC registered quad-channel kit of four 32 GB RDIMMs for compatible servers and NAS systems
Capacity 128GB (4 x 32GB)
This kit provides 128GB of DDR4 2666 ECC Registered memory across four 32GB modules. It is built for servers, workstations and NAS platforms that require registered DIMMs. Standard desktop computers cannot use this memory because they lack the necessary memory controller support.
ECC circuitry corrects single-bit errors in real time, protecting data integrity during long compute or storage tasks. Registered buffering reduces electrical load on the memory controller, allowing all four modules to run at the rated 2666 MT/s without signal degradation. The kit is also backward compatible with 2133 and 2400 MT/s systems.
Each module uses the standard 288-pin DDR4 form factor and operates at 1.2V, so it fits any DDR4 RDIMM slot. The registered design means it must not be mixed with unbuffered or load-reduced DIMMs; doing so will prevent the system from posting. No heat spreaders are present, so clearance is minimal.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R4128S |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Each module operates at 1.2V, the standard DDR4 voltage, so total draw stays within the platform's registered DIMM power budget for 24/7 NAS workloads.
The SA6400 needs free 288-pin DDR4 slots that support registered ECC DIMMs; the system's memory controller must be configured for registered modules, not unbuffered or load-reduced types.
Yes, the kit is backward compatible with 2133MHz and 2400MHz speeds; all populated slots will run at the lowest common frequency and matched timings.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?