Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR4 memory module with gold edge contacts and black chips on both sides

OWC

OWC 128GB DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC Load Reduced DIMM memory upgrade

SKU CH-9SC5-Q7D6X

A 128 GB DDR4 3200 ECC load-reduced DIMM validated for HP SimpliVity 380 Gen10 servers

  • Capacity128GB
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCYes

Capacity 128GB

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • 128GB capacity fits large datasets in a single module
  • ECC load-reduced design protects data integrity in servers
  • DDR4 3200 CL22 speed matches HP SimpliVity 380 Gen10 specs
  • 2V operation lowers power draw per DIMM
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

Targeted Server Upgrade

This 128GB DDR4 ECC Load Reduced DIMM is engineered specifically for the HP SimpliVity 380 Gen10 platform. It addresses the memory demands of virtualised workloads and database tasks in that server environment. The module will not function in standard desktop computers or consumer motherboards. Builders needing unbuffered or registered ECC memory must choose a different product type.

Capacity and Headroom

A single module delivers 128GB at DDR4 3200 with CL22 latency and 1.2V operation. The 4Rx4 organisation provides high density for multi-socket configurations where slot count is limited. Backward compatibility covers 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds for flexible deployment. Systems requiring greater total capacity will need additional modules of the same specification.

Build and Connectivity

The 288-pin LRDIMM form factor fits the designated server memory slots without a heat spreader. Load Reduced architecture reduces electrical load on the memory controller compared to standard registered DIMMs. This module cannot be mixed with unbuffered or registered ECC memory in the same system. JEDEC and RoHS compliance ensures reliable operation in qualified HP SimpliVity 380 Gen10 configurations.

Kohokohdat

  • 128GB capacity fits large datasets in a single module
  • ECC load-reduced design protects data integrity in servers
  • DDR4 3200 CL22 speed matches HP SimpliVity 380 Gen10 specs
  • 2V operation lowers power draw per DIMM
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

Tekniset tiedot

BrandOWC
Part Number3L2D44R4128G
Capacity128GB
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Heat SpreaderNo
Compatible SystemHP SimpliVity 380 Gen10

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 128GB DDR4 3200 CL22 4Rx4 ECC LRDIMM run with my existing 2666MHz or 2933MHz modules in the HP SimpliVity 380 Gen10?

The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz speeds, but it cannot be mixed with unbuffered or standard ECC registered memory; only load-reduced DIMMs of matching rank and voltage should share the same server.

How can I verify the 128GB 288-pin 1.2V DDR4 3200 module is detected and running with ECC active after installation?

Enter the server BIOS or iLO interface and confirm the total capacity shows the added 128GB, the speed reads 3200 MT/s (or the downshifted speed), and the memory status reports ECC enabled and no correctable error alerts.

Does the single 128GB 4Rx4 CL22 LRDIMM ship with a heat spreader or any mounting hardware, or must I order those separately?

The module has no heat spreader and ships as the bare DIMM only; no brackets, screws or thermal pads are included and none are required for the HP SimpliVity 380 Gen10 memory slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.