暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR4 memory module with gold edge contacts and black chips on both sides

OWC

OWC 128GB DDR4 3200 CL22 4Rx4 288-pin 1.2V ECC Load Reduced DIMM memory upgrade

SKU CH-9SC5-Q7D6X

A 128 GB DDR4 3200 ECC load-reduced DIMM validated for HP SimpliVity 380 Gen10 servers

  • Capacity128GB
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCYes

Capacity 128GB

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • 128GB capacity fits large datasets in a single module
  • ECC load-reduced design protects data integrity in servers
  • DDR4 3200 CL22 speed matches HP SimpliVity 380 Gen10 specs
  • 2V operation lowers power draw per DIMM
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

Targeted Server Upgrade

This 128GB DDR4 ECC Load Reduced DIMM is engineered specifically for the HP SimpliVity 380 Gen10 platform. It addresses the memory demands of virtualised workloads and database tasks in that server environment. The module will not function in standard desktop computers or consumer motherboards. Builders needing unbuffered or registered ECC memory must choose a different product type.

Capacity and Headroom

A single module delivers 128GB at DDR4 3200 with CL22 latency and 1.2V operation. The 4Rx4 organisation provides high density for multi-socket configurations where slot count is limited. Backward compatibility covers 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds for flexible deployment. Systems requiring greater total capacity will need additional modules of the same specification.

Build and Connectivity

The 288-pin LRDIMM form factor fits the designated server memory slots without a heat spreader. Load Reduced architecture reduces electrical load on the memory controller compared to standard registered DIMMs. This module cannot be mixed with unbuffered or registered ECC memory in the same system. JEDEC and RoHS compliance ensures reliable operation in qualified HP SimpliVity 380 Gen10 configurations.

特長

  • 128GB capacity fits large datasets in a single module
  • ECC load-reduced design protects data integrity in servers
  • DDR4 3200 CL22 speed matches HP SimpliVity 380 Gen10 specs
  • 2V operation lowers power draw per DIMM
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

仕様

BrandOWC
Part Number3L2D44R4128G
Capacity128GB
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Heat SpreaderNo
Compatible SystemHP SimpliVity 380 Gen10

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 128GB DDR4 3200 CL22 4Rx4 ECC LRDIMM run with my existing 2666MHz or 2933MHz modules in the HP SimpliVity 380 Gen10?

The module is backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz speeds, but it cannot be mixed with unbuffered or standard ECC registered memory; only load-reduced DIMMs of matching rank and voltage should share the same server.

How can I verify the 128GB 288-pin 1.2V DDR4 3200 module is detected and running with ECC active after installation?

Enter the server BIOS or iLO interface and confirm the total capacity shows the added 128GB, the speed reads 3200 MT/s (or the downshifted speed), and the memory status reports ECC enabled and no correctable error alerts.

Does the single 128GB 4Rx4 CL22 LRDIMM ship with a heat spreader or any mounting hardware, or must I order those separately?

The module has no heat spreader and ships as the bare DIMM only; no brackets, screws or thermal pads are included and none are required for the HP SimpliVity 380 Gen10 memory slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。