Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC RDIMM Dell PowerEdge R310 R410 R510

SKU CH-8PBF-K6714

16 GB kit of DDR3 1333 ECC registered memory for Dell PowerEdge R310, R410 and R510 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in server workloads
  • 16GB kit (2×8GB) expands memory capacity for Dell PowerEdge servers
  • DDR3 1333 CL9 timing matches factory specifications for stable operation
  • 240-pin registered DIMM form factor fits R310, R410, R510 and C-series systems
  • Replaces multiple Dell part numbers for straightforward upgrade compatibility

OWC 16GB DDR3 ECC RDIMM Kit

This OWC kit provides 16GB of DDR3 ECC registered memory in a matched pair of 8GB modules. It is built for Dell PowerEdge servers that require 240-pin registered DIMMs with error-correcting code. The modules run at 1333MHz with CL9 latency at 1.5V.

Suits PowerEdge R310 R410 R510 owners

This memory fits Dell PowerEdge R310, R410, R510, C1100 and C6100 systems that accept registered ECC RDIMMs. It will not work in standard desktop PCs or workstations that need unbuffered non-ECC modules. Builders mixing registered with unbuffered memory should look elsewhere.

Registered ECC prevents desktop use

The single specification that decides fit is the registered ECC design. Only servers and workstations with chipsets supporting registered DDR3 ECC can use these modules. Desktop motherboards cannot use them.

Kohokohdat

  • ECC registered design protects data integrity in server workloads
  • 16GB kit (2×8GB) expands memory capacity for Dell PowerEdge servers
  • DDR3 1333 CL9 timing matches factory specifications for stable operation
  • 240-pin registered DIMM form factor fits R310, R410, R510 and C-series systems
  • Replaces multiple Dell part numbers for straightforward upgrade compatibility

Tekniset tiedot

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge C1100
Dell PowerEdge C6100
Dell PowerEdge R310
Dell PowerEdge R410
Dell PowerEdge R510

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the registered DIMM design require any special handling when I add or replace modules in the PowerEdge R410?

The modules are registered ECC RDIMMs, so they must be installed in matched pairs and cannot be mixed with unbuffered memory; follow the server's population rules for 2Rx4 configuration.

What speed ceiling will the kit hit first when the R510 runs memory-intensive workloads continuously?

The kit is rated at DDR3 1333 (PC3-10600) CL9, so sustained throughput is limited to that 1333 MT/s data rate regardless of load duration.

How much heat and power should I expect from the two 8 GB modules operating all day in a C6100 chassis?

Each module runs at 1.5 V without a heat spreader; total power draw stays within standard DDR3 1333 registered DIMM limits and relies on the server's airflow for cooling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.