OWC 16GB 2x8GB DDR3 1333 ECC RDIMM PowerVault NX300 NX3000
- 16GB (2 x 8GB)
- 240-Pin DDR3 ECC RD…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
OWC
16 GB kit of DDR3 1333 ECC registered memory for Dell PowerEdge R310, R410 and R510 servers
Capacity 16GB (2 x 8GB)
This OWC kit provides 16GB of DDR3 ECC registered memory in a matched pair of 8GB modules. It is built for Dell PowerEdge servers that require 240-pin registered DIMMs with error-correcting code. The modules run at 1333MHz with CL9 latency at 1.5V.
This memory fits Dell PowerEdge R310, R410, R510, C1100 and C6100 systems that accept registered ECC RDIMMs. It will not work in standard desktop PCs or workstations that need unbuffered non-ECC modules. Builders mixing registered with unbuffered memory should look elsewhere.
The single specification that decides fit is the registered ECC design. Only servers and workstations with chipsets supporting registered DDR3 ECC can use these modules. Desktop motherboards cannot use them.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Dell PowerEdge C1100 Dell PowerEdge C6100 Dell PowerEdge R310 Dell PowerEdge R410 Dell PowerEdge R510 |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
The modules are registered ECC RDIMMs, so they must be installed in matched pairs and cannot be mixed with unbuffered memory; follow the server's population rules for 2Rx4 configuration.
The kit is rated at DDR3 1333 (PC3-10600) CL9, so sustained throughput is limited to that 1333 MT/s data rate regardless of load duration.
Each module runs at 1.5 V without a heat spreader; total power draw stays within standard DDR3 1333 registered DIMM limits and relies on the server's airflow for cooling.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟