Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 ECC registered DIMMs, 240-pin, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC Registered RDIMM Kit for Supermicro X8 Series

SKU CH-VCH2-7JBCT

16 GB DDR3 1333 ECC registered RDIMM kit for Supermicro X8 series workstations and servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit adds capacity for virtualization workloads
  • DDR3 1333 CL9 timing matches Supermicro X8 series specifications
  • ECC registered design detects and corrects single-bit errors in server workloads
  • 2Rx4 240-pin 1.5 V modules install directly into supported X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN boards
  • Replaces Supermicro MEMDR3 part numbers for drop-in compatibility

OWC DDR3 ECC RDIMM Kit for Supermicro X8 Series

This 16 GB kit contains two 8 GB registered DIMMs built for Supermicro X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN motherboards. It targets administrators who need to extend the service life of existing DDR3 server platforms or populate empty slots in qualified workstations.

Replaces Supermicro MEMDR380L series modules

The modules match the PC3-10600 1333 MHz CL9 1.5 V 2Rx4 specification of the listed Supermicro part numbers, so they serve as direct drop-in replacements. The upgrade is worth it when a system requires registered ECC memory and the current configuration cannot be expanded with unbuffered DIMMs.

Installs in standard 240-pin DDR3 slots

No heat spreader is fitted, so clearance is not an issue in dense server chassis. The main risk is mixing these registered modules with unbuffered memory or installing them in desktop boards that do not support ECC registered operation.

Kohokohdat

  • 16 GB dual-channel kit adds capacity for virtualization workloads
  • DDR3 1333 CL9 timing matches Supermicro X8 series specifications
  • ECC registered design detects and corrects single-bit errors in server workloads
  • 2Rx4 240-pin 1.5 V modules install directly into supported X8DTL, X8DTN+, X8DTT, X8DTU and X8OBN boards
  • Replaces Supermicro MEMDR3 part numbers for drop-in compatibility

Tekniset tiedot

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X8DTL Series
Supermicro Motherboard X8DTN+ Series
Supermicro Motherboard X8DTT Series
Supermicro Motherboard X8DTU Series
Supermicro Motherboard X8OBN Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 240-pin DDR3 RDIMM fit the DIMM slots on a Supermicro X8DTU motherboard?

Yes, the 240-pin DDR3 ECC Registered DIMMs are built for the X8DTU and the other listed X8 series boards.

Which slots should I populate first when installing the two 8 GB modules?

Install the pair in the same channel, typically slots 1 and 3 or 2 and 4, following the board's population guide; the most common error is placing them in adjacent slots of different channels.

Can I later add unbuffered ECC DIMMs alongside this registered kit?

No, registered and unbuffered ECC memory cannot be mixed; any future expansion must use DDR3 1333 ECC Registered RDIMMs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.