Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC Registered RDIMM Kit SuperWorkstation 7036A 7046A

SKU CH-824C-DE314

16 GB dual-channel DDR3 ECC registered kit for Supermicro SuperWorkstation 7036A and 7046A systems

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation memory
  • DDR3 1333 MHz CL9 matches system specifications
  • 5 V 240-pin RDIMM fits SuperWorkstation 7036A and 7046A
  • Replaces Supermicro MEMDR380LCL01ER13 and related part numbers

System-Specific DDR3 ECC Kit

This 16GB kit contains two 8GB DDR3 1333 registered DIMMs built for Supermicro SuperWorkstation 7036A and 7046A systems. It delivers ECC error correction and registered signalling required by those workstations. The modules run at 1.5V with CL9 latency and use a 2Rx4 organisation. They are not compatible with standard desktop platforms.

Registered DIMM Upgrade Path

Each 240-pin module fits the workstation's DDR3 slots and expects a chipset that supports registered ECC memory. The kit replaces Supermicro part numbers such as MEMDR380LCL01ER13 and MEMDR380LHL01ER13. It cannot be mixed with unbuffered DIMMs, so all slots must use registered modules. No heat spreader is included, leaving clearance for dense server configurations.

16GB Capacity Envelope

The 16GB total suits memory-hungry server workloads, virtualization hosts, or NAS appliances that benefit from ECC integrity. Workloads requiring more than 16GB will need additional registered kits or higher-density DIMMs. Buyers needing unbuffered memory for consumer boards or capacities beyond this kit's limit should look elsewhere.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands workstation memory
  • DDR3 1333 MHz CL9 matches system specifications
  • 5 V 240-pin RDIMM fits SuperWorkstation 7036A and 7046A
  • Replaces Supermicro MEMDR380LCL01ER13 and related part numbers

Tekniset tiedot

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperWorkstation 7036A Series
Supermicro SuperWorkstation 7046A Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the maximum memory capacity this 2 x 8 GB kit adds to a Supermicro SuperWorkstation 7036A or 7046A?

The kit provides 16 GB total, using two 8 GB registered ECC DDR3 modules that run at 1333 MHz with CL9 latency and 1.5 V.

How much heat do these registered ECC DDR3 modules generate during continuous operation?

The modules operate at 1.5 V and have no heat spreader; registered DDR3 at this voltage typically stays within normal server thermal limits under sustained load.

Which motherboard memory slots are required for this 240-pin DDR3 RDIMM kit to function?

The kit needs a Supermicro SuperWorkstation 7036A or 7046A system with 240-pin DDR3 slots that support registered ECC memory; it will not work in standard desktop boards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.