OWC 16GB (2x8GB) DDR3 1333 PC3-10600 CL9 ECC Registered RDIMM 240-pin 1.5V memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB dual-channel DDR3-1600 ECC registered RDIMM kit for HP Z620 workstations
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB DDR3 1600 CL11 registered ECC modules built for the HP Workstation Z620. It is designed for administrators and engineers who need error-correcting memory in a validated server platform. The modules will not work in standard desktop computers or alongside unbuffered DIMMs.
Operating at the JEDEC-standard 1.5 V, the sticks draw typical DDR3 registered power without a heat spreader. Passive cooling in a Z620 chassis keeps temperatures within specification during sustained workloads. Acoustic output remains unchanged because the memory adds no moving parts.
Installing the pair doubles the Z620's memory capacity to 16 GB and enables ECC protection for data integrity. The registered design reduces electrical load on the memory controller, allowing stable operation at full population. No software or firmware updates are required beyond the standard BIOS.
| Brand | OWC |
|---|---|
| Part Number | 1R6D31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | HP Workstation Z620 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off and unplug the workstation, open the chassis, locate the eight DIMM slots grouped by processor, and insert each 240-pin module until the side latches click. The step people miss is seating both ends evenly; a tilted module will not register and can cause boot failure.
The modules have no heat spreaders and no moving parts, so no routine maintenance is required. If a DIMM fails, the ECC function will log correctable errors in the system event log, and the faulty 8 GB stick can be swapped individually without replacing the matched pair.
The memory controller caps bandwidth at the rated DDR3 1600 PC3-12800 speed, so throughput plateaus there. Under heavy sustained loads the registered buffer adds one cycle of latency, making CAS 11 the practical latency floor before the CPU or memory bus becomes the bottleneck.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?