Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

OWC

OWC 16GB (2x8GB) DDR3 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-ADNZ-SWS9Z

16 GB dual-channel DDR3-1600 ECC registered RDIMM kit for HP Z620 workstations

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in workstations
  • 16 GB kit (2 × 8 GB) expands HP Z620 memory capacity
  • DDR3 1600 CL11 at 1.5 V matches factory specifications
  • 240-pin RDIMM form factor fits server and workstation slots
  • Replaces multiple HP part numbers for direct compatibility

Targeted Workstation Upgrade

This 16 GB kit contains two 8 GB DDR3 1600 CL11 registered ECC modules built for the HP Workstation Z620. It is designed for administrators and engineers who need error-correcting memory in a validated server platform. The modules will not work in standard desktop computers or alongside unbuffered DIMMs.

Thermals and Power Draw

Operating at the JEDEC-standard 1.5 V, the sticks draw typical DDR3 registered power without a heat spreader. Passive cooling in a Z620 chassis keeps temperatures within specification during sustained workloads. Acoustic output remains unchanged because the memory adds no moving parts.

What the Kit Changes

Installing the pair doubles the Z620's memory capacity to 16 GB and enables ECC protection for data integrity. The registered design reduces electrical load on the memory controller, allowing stable operation at full population. No software or firmware updates are required beyond the standard BIOS.

Přednosti

  • ECC registered design protects data integrity in workstations
  • 16 GB kit (2 × 8 GB) expands HP Z620 memory capacity
  • DDR3 1600 CL11 at 1.5 V matches factory specifications
  • 240-pin RDIMM form factor fits server and workstation slots
  • Replaces multiple HP part numbers for direct compatibility

Specifikace

BrandOWC
Part Number1R6D31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemHP Workstation Z620

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 240-pin DDR3 ECC RDIMM modules in the HP Z620, and which step is often done wrong?

Power off and unplug the workstation, open the chassis, locate the eight DIMM slots grouped by processor, and insert each 240-pin module until the side latches click. The step people miss is seating both ends evenly; a tilted module will not register and can cause boot failure.

What maintenance or replacement will the 16 GB DDR3 1600 ECC registered kit need over time?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required. If a DIMM fails, the ECC function will log correctable errors in the system event log, and the faulty 8 GB stick can be swapped individually without replacing the matched pair.

What limit appears first when the HP Z620 runs sustained workloads with this 1.5 V DDR3 1600 CL11 memory?

The memory controller caps bandwidth at the rated DDR3 1600 PC3-12800 speed, so throughput plateaus there. Under heavy sustained loads the registered buffer adds one cycle of latency, making CAS 11 the practical latency floor before the CPU or memory bus becomes the bottleneck.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.