Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 240-pin DDR3L ECC registered DIMMs with black chips, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 ECC Registered RDIMM 240-pin 1.35V 1Rx4 memory upgrade

SKU CH-8PND-3HNTR

16 GB DDR3L ECC registered RDIMM kit for Supermicro X9 server and workstation boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed delivers responsive multitasking
  • 35 V low-voltage operation reduces power draw
  • 16 GB dual-channel kit expands memory capacity
  • Validated for Supermicro X9DBU X9DR3 X9DR7 X9DRD X9DRE motherboards

16GB DDR3L ECC RDIMM kit

This kit supplies 16GB of DDR3L ECC registered memory in a matched pair of 8GB modules. It is built for workstations, servers and NAS systems that require registered DIMMs with error correction. Standard desktop boards cannot use registered memory, so this kit will not work in consumer platforms.

240-pin 1.35V CL11 specification

The modules run at 1600MHz (PC3L-12800) with CL11 latency at 1.35V. Registered buffering and ECC are integrated on each stick, and the 1Rx4 organisation matches the density expected by the listed Supermicro X9 series motherboards. No heat spreaders are fitted, keeping the profile low for dense server chassis.

Supermicro X9 series compatibility

The kit replaces Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16 across X9DBU, X9DR3, X9DR7, X9DRD and X9DRE boards. It cannot be mixed with unbuffered DIMMs, so buyers who need to combine memory types should look elsewhere.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed delivers responsive multitasking
  • 35 V low-voltage operation reduces power draw
  • 16 GB dual-channel kit expands memory capacity
  • Validated for Supermicro X9DBU X9DR3 X9DR7 X9DRD X9DRE motherboards

Tekniset tiedot

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DBU Series
Supermicro Motherboard X9DR3 Series
Supermicro Motherboard X9DR7 Series
Supermicro Motherboard X9DRD Series
Supermicro Motherboard X9DRE Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 1Rx4 ECC registered modules require any firmware updates or reconfiguration after installation?

No firmware updates are needed; the 1Rx4 registered DIMMs initialise automatically on supported Supermicro X9 series boards.

What thermal limit appears first when the 1.35 V DDR3L kit runs continuously at 1600 MHz?

The 1.35 V operating voltage keeps power draw low, so the modules stay within JEDEC thermal limits without active cooling.

How much heat and noise do the two 8 GB RDIMMs add when the server runs all day?

Without heat spreaders the sticks rely on chassis airflow; they add negligible heat and produce no audible noise.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.