Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3L ECC RDIMM modules with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 240-pin ECC RDIMM memory upgrade

SKU CH-8272-SVTZ5

16 GB DDR3L 1600 ECC registered DIMM kit for Supermicro X9 server boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V reduces power draw
  • 240-pin RDIMM form factor fits Supermicro X9 series boards
  • Replaces Supermicro MEMDR380L part numbers for direct upgrade

ECC Registered DDR3L Kit

This kit provides 16 GB of DDR3L ECC registered memory in two 8 GB modules. It is built for Supermicro X9DRL, X9DRT, X9DRW, X9DRX+ and X9QR7 motherboards in workstation and server roles. The modules run at 1600 MT/s with a CL11 latency at 1.35 V. They are designed to extend the life of existing infrastructure or support new server builds.

Suited for registered ECC slots only

The memory fits servers, workstations, NAS units and routers that accept 240-pin DDR3L registered DIMMs. It will not work in standard desktop boards that require unbuffered non-ECC modules. Mixing with unbuffered memory is not supported. Buyers who need unbuffered consumer memory should look at a different product line.

Steady throughput under load

Registered buffering and ECC correction maintain data integrity during continuous multi-threaded workloads. The 1.35 V operation reduces thermal stress compared with higher-voltage DDR3 modules. Sustained performance depends on the platform memory controller and channel population. Modules without heat spreaders rely on chassis airflow for cooling.

Kohokohdat

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V reduces power draw
  • 240-pin RDIMM form factor fits Supermicro X9 series boards
  • Replaces Supermicro MEMDR380L part numbers for direct upgrade

Tekniset tiedot

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DRL Series
Supermicro Motherboard X9DRT Series
Supermicro Motherboard X9DRW Series
Supermicro Motherboard X9DRX+ Series
Supermicro Motherboard X9QR7 Series

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Which Supermicro motherboard series must I already have for this DDR3L 1600 ECC RDIMM kit to be compatible?

This kit is validated for Supermicro X9DRL, X9DRT, X9DRW, X9DRX+ and X9QR7 series motherboards.

Can I keep my existing unbuffered DDR3L modules and add these registered 1Rx4 DIMMs alongside them?

No. The manufacturer highlights state that registered ECC memory cannot be mixed with unbuffered memory.

After installation, how do I confirm the kit is running at the rated PC3L-12800 CL11 1.35 V settings?

Check the BIOS or a system-information tool such as CPU-Z; it should report DDR3L 1600 MHz, CL11 timings and 1.35 V operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.