暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR3L ECC RDIMM modules with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 240-pin ECC RDIMM memory upgrade

SKU CH-8272-SVTZ5

16 GB DDR3L 1600 ECC registered DIMM kit for Supermicro X9 server boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V reduces power draw
  • 240-pin RDIMM form factor fits Supermicro X9 series boards
  • Replaces Supermicro MEMDR380L part numbers for direct upgrade

ECC Registered DDR3L Kit

This kit provides 16 GB of DDR3L ECC registered memory in two 8 GB modules. It is built for Supermicro X9DRL, X9DRT, X9DRW, X9DRX+ and X9QR7 motherboards in workstation and server roles. The modules run at 1600 MT/s with a CL11 latency at 1.35 V. They are designed to extend the life of existing infrastructure or support new server builds.

Suited for registered ECC slots only

The memory fits servers, workstations, NAS units and routers that accept 240-pin DDR3L registered DIMMs. It will not work in standard desktop boards that require unbuffered non-ECC modules. Mixing with unbuffered memory is not supported. Buyers who need unbuffered consumer memory should look at a different product line.

Steady throughput under load

Registered buffering and ECC correction maintain data integrity during continuous multi-threaded workloads. The 1.35 V operation reduces thermal stress compared with higher-voltage DDR3 modules. Sustained performance depends on the platform memory controller and channel population. Modules without heat spreaders rely on chassis airflow for cooling.

特長

  • ECC registered design protects data integrity in servers
  • 16 GB dual-channel kit (2 × 8 GB) expands memory capacity
  • DDR3L 1600 CL11 at 1.35 V reduces power draw
  • 240-pin RDIMM form factor fits Supermicro X9 series boards
  • Replaces Supermicro MEMDR380L part numbers for direct upgrade

仕様

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DRL Series
Supermicro Motherboard X9DRT Series
Supermicro Motherboard X9DRW Series
Supermicro Motherboard X9DRX+ Series
Supermicro Motherboard X9QR7 Series

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Which Supermicro motherboard series must I already have for this DDR3L 1600 ECC RDIMM kit to be compatible?

This kit is validated for Supermicro X9DRL, X9DRT, X9DRW, X9DRX+ and X9QR7 series motherboards.

Can I keep my existing unbuffered DDR3L modules and add these registered 1Rx4 DIMMs alongside them?

No. The manufacturer highlights state that registered ECC memory cannot be mixed with unbuffered memory.

After installation, how do I confirm the kit is running at the rated PC3L-12800 CL11 1.35 V settings?

Check the BIOS or a system-information tool such as CPU-Z; it should report DDR3L 1600 MHz, CL11 timings and 1.35 V operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。