OWC 16GB DDR3 1333 ECC Registered RDIMM 1.5V 2Rx4 240-pin memory upgrade
- 16GB
- 240-Pin DDR3 ECC RD…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
16 GB DDR3L 1600 ECC registered RDIMM kit for Dell PowerEdge R815, R820, T320, T420 and T620 servers
Capacity 16GB (2 x 8GB)
This 16GB kit contains two 8GB DDR3L 1600 registered DIMMs built for Dell PowerEdge servers including the R815, R820, T320, T420 and T620. It delivers ECC error correction and registered buffering required by those platforms. Standard desktop boards cannot use this memory and it must not be mixed with unbuffered modules.
The modules run at 1.35V, reducing power draw and heat output compared with standard DDR3. No heat spreaders are fitted, so airflow through the server chassis handles cooling silently. CL11 latency at 1600MHz provides stable throughput for virtualization and database workloads.
Each stick uses the 240-pin RDIMM layout keyed for registered server slots. The 1Rx4 rank organization matches the supported configurations for the listed Dell systems. Buyers needing unbuffered memory or higher capacities per module should look elsewhere.
| Brand | OWC |
|---|---|
| Part Number | 1R6T31R4016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3L ECC RDIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Heat Spreader | No |
| Compatible System | Dell PowerEdge R815 Dell PowerEdge R820 Dell PowerEdge T320 Dell PowerEdge T420 Dell PowerEdge T620 |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down, open the chassis, align each module's notch with the slot key, press firmly until the ejector tabs click, then verify in BIOS that all 16GB are recognised at 1600 MHz CL11.
No routine maintenance is required; if a module fails, replace it with an identical 8GB 1Rx4 DDR3L 1600 CL11 1.35V registered DIMM to keep ECC protection intact.
The CL11 latency at 1600 MHz and 1.35V voltage set the performance ceiling; sustained throughput cannot exceed the PC3L-12800 rating of the modules.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?