Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 ECC SODIMM sticks, no heat spreader, 260-pin form factor

OWC

OWC 16GB (2x8GB) DDR4 2666MHz ECC SODIMM for Synology DS1522+

SKU CH-YVZB-W6C10

16 GB DDR4 ECC SODIMM kit (2 × 8 GB) at 2666 MHz CL19 for Synology DS1522+

  • Capacity16GB (2 x 8GB)
  • Type260-Pin DDR4 ECC SODIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • 16GB ECC kit doubles DS1522+ capacity for heavier workloads
  • DDR4 2666 CL19 matches system spec for stable operation
  • JEDEC and RoHS compliant ensures warranty-safe upgrade
  • Backward compatible with 2400 and 2133 speeds
  • Unbuffered 1Rx8 SODIMMs install easily in both slots

Designed for Synology DS1522+

This 16GB kit contains two 8GB DDR4 ECC SODIMM modules built specifically for the Synology DiskStation DS1522+. It targets NAS owners who need reliable memory expansion for virtualization, container workloads or heavy multi-user file serving. The unbuffered design matches the platform requirements exactly.

ECC and 2666MHz CL19 specification

Each module runs at 2666MHz with a CAS latency of 19 and operates at 1.2V. The 260-pin form factor and ECC support are the single specifications that determine compatibility; non-ECC or registered DIMMs will not function in this system. Backward compatibility with 2400MHz and 2133MHz buses is included.

Low-voltage operation without spreaders

At 1.2V the modules draw minimal power and generate little heat, allowing passive cooling inside the compact NAS chassis. No heat spreaders are fitted, so airflow from the system fans is sufficient for normal continuous operation. Acoustic impact is negligible in typical rack or desktop placement.

Kohokohdat

  • 16GB ECC kit doubles DS1522+ capacity for heavier workloads
  • DDR4 2666 CL19 matches system spec for stable operation
  • JEDEC and RoHS compliant ensures warranty-safe upgrade
  • Backward compatible with 2400 and 2133 speeds
  • Unbuffered 1Rx8 SODIMMs install easily in both slots

Tekniset tiedot

BrandOWC
Part Number2C6D41R8016P
Capacity16GB (2 x 8GB)
Type260-Pin DDR4 ECC SODIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemSynology DiskStationDS1522+

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 2666 MHz rating mean once the modules are installed in a Synology DS1522+?

The kit runs at 2666 MHz (PC4-21300) with CL19 latency. In the DS1522+ it delivers that speed natively, and will also operate at 2400 MHz or 2133 MHz if the system requires a lower frequency.

Which memory standard and form factor does this kit use, and what does that limit?

It uses 260-pin DDR4 ECC unbuffered SODIMM. The SODIMM form factor fits only laptops, micro servers and NAS units with SO-DIMM slots; it cannot be used in full-size DIMM motherboards.

What physical space and slot layout are needed to install both 8 GB sticks?

Two adjacent 260-pin SO-DIMM slots are required. Each module is a standard-height stick without a heat spreader, so it clears typical NAS chassis lids and nearby components.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.