OWC 8GB DDR4 2666MHz ECC SODIMM 1Rx8 CL19 1.2V Synology RS820+ RS820RP+
- 8GB
- 260-Pin DDR4 ECC SO…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
OWC
8GB DDR4 2666MHz ECC UDIMM adds error-correcting memory to Synology RS2421+ and RS2421RP+ NAS units
Capacity 8GB
This 8GB DDR4 ECC UDIMM is validated for the Synology RackStation RS2421+ and RS2421RP+. It adds capacity to NAS workloads that require error-correcting memory for data integrity. The single module installs in a standard 288-pin slot. It is not suited for systems that need registered DIMMs or non-ECC memory.
The module runs at the JEDEC 1.2V specification with a CL19 latency at 2666MHz. Standard voltage keeps power draw low and thermals manageable inside a populated rack chassis. No heat spreader is fitted, so airflow from the system fans cools the DRAM directly. Acoustic profile is unchanged because the DIMM adds no moving parts.
The stick fits any DDR4 UDIMM slot wired for ECC unbuffered operation. Backward compatibility with 2133MHz and 2400MHz buses lets it slot into mixed-speed configurations without manual tuning. It frees a second slot for future expansion while delivering 8GB per module. Builds requiring registered memory or higher densities must use different modules.
| Brand | OWC |
|---|---|
| Part Number | 2E6D41R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | Synology RackstationRS2421+ Synology RackstationRS2421RP+ |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off the NAS, open the chassis, align the notch on the 288-pin DDR4 UDIMM with the slot key, press firmly until both retention clips click, then confirm the module is recognised in DSM before closing the case.
The module has no moving parts and requires no scheduled maintenance; replacement is only needed if a memory error appears in DSM logs or a capacity increase is desired.
The memory controller caps operation at 2666MHz CL19, so bandwidth and latency remain fixed regardless of load duration.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?